Image/Relay-Out - E-line PRO4 Series User Manaul

Parameter Function
You can turn on or turn off the light/wiper.
Light and
wiper

5.6 Image/Relay-out

Select one monitor channel video and then click Image button in section 8, the interface is
shown as Figure 5-12.
5.6.1 Image
Here you can adjust its brightness, contrast, hue and saturation. (Current channel border
becomes green).
Or you can click Reset button to restore system default setup.
5.6.2 Relay output
Here you can enable or disable the alarm signal of the corresponding port. See Figure
5-13.
3D Intelligent Positioning
Key
You can click this icon to
display or hide the PTZ
control platform.
Figure 5-11
Figure 5-12
156