Storage - E-line PRO4 Series User Manaul

4.10.3.4 Alarm Output
Here is for you to set proper alarm output such as schedule, manual.
Please highlight icon
After all the setups please click OK button, system goes back to the previous menu. See
Figure 4-98.

4.10.4 Storage

4.10.4.1 Schedule
4.10.4.1.1 Record
Note:
You need to have proper rights to implement the following operations. Please make
sure the HDDs have been properly installed.
After the system booted up, it is in default 24-hour regular mode. You can set record type
and time in schedule interface.
In the main menu, from Setting->Storage->Schedule, you can go to schedule menu.
See Figure 4-102.
Please note you need to go to main menu->Setting->System->General->Holiday to
set holiday date first, otherwise, there is no holiday setup item.
 Channel: Please select the channel number first. You can select "all" if you want to
set for the whole channels.

: Sync connection icon. Select icon
can be edited together. Now the icon is shown as
to select the corresponding alarm output.
Figure 4-98
of several dates, all checked items
.
117