Search; Record Control; Alarm Output; Remote Device - E-line PRO4 Series User Manaul

Item
Color mode
EQ
Image position

4.4.4 Search

Please refer to chapter 4.8.1 for detailed information.

4.4.5 Record Control

Please refer to chapter 4.10.4.3 for detailed information.

4.4.6 Alarm Output

Please refer to chapter 4.10.3.4 for detailed information.

4.4.7 Remote Device

Please refer to chapter 4.10.1.1 for detailed information.

4.5 Navigation Bar

You need to go to the Main menu->Setting->System->General to enable navigation
bar function; otherwise you can not see the following interface.
The navigation bar is shown as below. See Figure 4-23.

4.5.1 Main Menu

Click button

4.5.2 Output Screen

Select corresponding window-split mode and output channels.

4.5.3 Favorites

Note
the video brightness if the value is high. But the video
noise may become too clear.
It includes several modes such as standard, color, bright,
gentle. Select a color mode, the sharpness, brightness,
contrast and
corresponding setup.
Click reset button, system can auto adjust the video to
the best effect.
This function is for analog channel only.
It is to adjust the image position on the screen. The
value here refers to the pixel. The default pixel value is
16.
This function is for analog channel only.
Figure 4-23
to go to the main menu interface.
etc can automatically switch to
53