Before You Begin; The File Sharing Screen - ZyXEL Communications eircom D1000 User Manual

CIFS runs over TCP/IP but uses the SMB (Server Message Block) protocol found in Microsoft
Windows for file and printer access; therefore, CIFS will allow all applications, not just Web
browsers, to open and share files across the Internet.
The Device uses Common Internet File System (CIFS) protocol for its file sharing functions. CIFS
compatible computers can access the USB file storage devices connected to the Device. CIFS
protocol is supported on Microsoft Windows, Linux Samba and other operating systems (refer to
your systems specifications for CIFS compatibility).
NFS
Network File System (NFS) is a protocol most commonly used on Unix-like systems in order to
share files across the network.
Samba
SMB is a client-server protocol used by Microsoft Windows systems for sharing files, printers, and
so on.
Samba is a free SMB server that runs on most Unix and Unix-like systems. It provides an
implementation of an SMB client and server for use with non-Microsoft operating systems.
File Transfer Protocol
This is a method of transferring data from one computer to another over a network such as the
Internet.

6.7.2 Before You Begin

Make sure the Device is connected to your network and turned on.
Connect the USB device to one of the Device's USB ports. Make sure the Device is connected to
1
your network.
The Device detects the USB device and makes its contents available for browsing. If you are
2
connecting a USB hard drive that comes with an external power supply, make sure it is connected
to an appropriate power source that is on.
Note: If your USB device cannot be detected by the Device, try disconnecting and
reconnecting it.

6.7.3 The File Sharing Screen

Use this screen to set up file sharing via the Device. To access this screen, click Network Setting
> Home Networking > File Sharing.
eircom D1000 modem User's Guide
Chapter 6 Home Networking
89