Port Isolation Summary Screen - ZyXEL Communications eircom D1000 User Manual

Figure 94 Network Setting > Port Isolation > Port Isolation
The following table describes the labels in this screen.
Table 50 Network Setting > Port Isolation > Port Isolation
LABEL
Port Isolation
Active
Group Index
ATM VCs
Ethernet
Wireless LAN
Group Summary
Port Isolation
Summary
Apply
Delete
Cancel

10.3.1 Port Isolation Summary Screen

Use this screen to view configured port isolation groups.
In the Port Isolation screen, click the Port Isolation Summary button in the Group Summary
section to display the following screen.
eircom D1000 modem User's Guide
DESCRIPTION
Activate or deactivate port isolation for the port isolation group.
Select the index number for the port isolation group.
When a port is assigned to a port isolation group, traffic will be forwarded to the other
ports in the group, but not to ports in other groups. If a port is not included in any
groups, traffic will be forwarded according to the routing table.
Select the ATM VC (PVC) to include in the port isolation group. Each ATM VC can only
be bound to one group.
Select the Ethernet (Eth) ports to include in the port isolation group. Each Ethernet
port can only be bound to one group.
Select the WLAN (AP) connection to include in the port isolation group. Additional APs
can be enabled on the More AP screen
Click this to view a summary of configured port isolation groups.
Add the selected port isolation group configuration.
Delete the selected port isolation group configuration.
Click this to restore your previously saved settings.
Chapter 10 Port Isolation
(Section 5.3 on page 54).
137