1. Manuals
  2. Brands
  3. Gmate Manuals
  4. Blood Glucose Meter
  5. SMART
  6. Owner's manual

Gmate SMART Owner's Manual

Blood glucose monitoring system
Hide thumbs Also See for SMART:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Owner's Manual
Customer Care (Toll-Free)
855-GO-GMATE (855-464-6283)
24 hours a day, 7 days a week
MANUFACTURED BY:
philosys Co., Ltd.
827-3, Sangpyeong-ri, Okgu-eup,
Gunsan-si, Jeollabuk-do, Korea
DISTRIBUTED BY:
philosys, Inc.
New York, NY 10010
xxxxxx / Rev. Date 2014-05 / Printed in Korea
Tel
+82-63-453-1421
Fax +82-63-453-1423
E-mail help@gmate.biz
Tel 855-GO-GMATE
(855-464-6283)
Fax 800-939-8670
E-mail info@gmate.com
www.Gmate.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SMART and is the answer not in the manual?

Questions and answers

Related Manuals for Gmate SMART

Summary of Contents for Gmate SMART

  • Page 1 Customer Care (Toll-Free) 855-GO-GMATE (855-464-6283) 24 hours a day, 7 days a week +82-63-453-1421 MANUFACTURED BY: philosys Co., Ltd. Fax +82-63-453-1423 E-mail help@gmate.biz 827-3, Sangpyeong-ri, Okgu-eup, Gunsan-si, Jeollabuk-do, Korea Tel 855-GO-GMATE DISTRIBUTED BY: philosys, Inc. (855-464-6283) Fax 800-939-8670 New York, NY 10010 E-mail info@gmate.com...
  • Page 2 Gmate® SMART is the smallest meter in the world. Please read the Owner’s Manual carefully before use. For use with the Gmate™ SMART App on your iPhone®, iPad® and iPod touch®. iOS 5.0 or higher is required. Please keep this Owner’s Manual in a safe place for reference.
  • Page 3 NOT as a source of medical advice. You agree that the Gmate™ SMART App will never be used to replace the advice of your doctor, or your common sense, and that you will not at any time rely on any information presented on your iPhone, iPad or iPod touch as the basis for health care, medical or other decisions that may result in injury or other ill effects.
  • Page 4 Apple assumes no risk for your use of the Gmate™ SMART App and makes no warranties whatsoever, expressed or implied, regarding the accuracy, completeness or usefulness of any information presented on your iPhone, iPad or iPod touch as a result of using the Gmate™...

  • Page 5: Table Of Contents

    TABLE OF CONTENTS Intended Use Caring for the Gmate® SMART Core Features of the Gmate® SMART Error Messages Important Safety Instructions Troubleshooting About the Gmate® SMART Gmate® SMART Meter Specifications System Functions Installing the Gmate™ SMART App Testing your Blood Glucose...

  • Page 6: Intended Use

    (sugar) in fresh capillary whole blood samples drawn from the fingertips, forearm, upper arm, palm, thigh or calf. The Gmate® SMART Blood Glucose Monitoring System is intended to be used by a single person and should not be shared with any other person.
  • Page 7 The Gmate™ SMART App allows the user to view their glucose test results and stores a lifetime of results. The user may e-mail their glucose test results to their healthcare provider to help them review, analyze, and evaluate their glucose test results to support an effective diabetes management program.

  • Page 8: Core Features Of The Gmate® Smart

    CORE FEATURES OF THE GMATE® SMART: The Gmate ™ SMART App is designed solely for the use of the Gmate® SMART Blood Glucose Monitoring System. The Gmate® SMART is easy to use. Its small size, simple portability and sleek design allow you to take it everywhere and anywhere.
  • Page 9 The Gmate™ SMART App can be downloaded from the App Store The Gmate™ SMART App has been specifically designed to work with your iPhone, iPad, iPod touch and has been certified by the developer to meet Apple’s performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.

  • Page 10: Important Safety Instructions

    Only use the Gmate® SMART Meter with the Gmate® Test Strips and Gmate® Control Solution. Keep the Gmate® SMART Meter away from and out of reach from children. Do NOT swallow. If any parts are swallowed, contact your healthcare provider immediately or...
  • Page 11 Keep your Gmate® SMART Meter and iPhone, iPad or iPod touch clean. Clean and disinfect your Gmate® SMART Meter and iPhone, iPad or iPod touch at least once per week by following the instructions on page 73 of this manual. Wash hands thoroughly with soap and water after handling the meter, lancing device, or test strips.
  • Page 12 IMPORTANT SAFETY INSTRUCTIONS Step 2 – Disinfect the surfaces of the Gmate® SMART Meter, lancing device, and iPhone, iPad or iPod touch to kill bloodborne pathogens such as hepatitis B, hepatitis C, or HIV. All parts of the kit are considered biohazardous and can potentially transmit infectious diseases, even after you have performed cleaning and disinfection.
  • Page 13 If you continue to have the same test results, follow the treatment advice of your healthcare provider. Check with your doctor if you experience symptoms inconsistent with your test results. Do NOT disassemble or change the Gmate® SMART Meter. Do NOT drop, step on, or subject the Gmate® SMART Meter to severe shock.
  • Page 14 IMPORTANT SAFETY INSTRUCTIONS Caution The Gmate® SMART Meter is NOT waterproof. Do NOT wash or touch with wet hands. Do NOT wipe the Gmate® SMART Meter with paint thinner or abrasive cleaners. Do NOT expose the Gmate® SMART Meter to rain, or high temperatures over 90°F (32°C), or under direct sunlight.

  • Page 15: About The Gmate® Smart

    The Gmate® SMART Meter measures the current and calculates your blood glucose level. Combined with the Gmate™ SMART App, it displays the test results and stores them on your iPhone, iPad or iPod touch.
  • Page 16 5. Lancing Device 3. Gmate® Control Solution 6. Carrying Case The Owner’s Manual is also included with your Gmate® SMART Meter. If any items are missing, please contact Gmate® Customer Service at 1-855-GO-GMATE (1-855-464-6283). iPhone, iPad or iPod touch is not included and must be purchased separately.
  • Page 17 ABOUT THE GMATE® SMART System Requirements To use the Gmate® SMART Meter with your iPhone, iPad or iPod touch, you will need: • Minimum of 30MB of available space • iOS 5.0 or higher installed • The Gmate™ SMART App The Gmate™...

  • Page 18: System Functions

    Power Indicator When this lights up, the meter is powered on and ready to test. Test Strip Port Insert the end of a Gmate® Test Strip into the Gmate® SMART Meter test strip port to begin a blood glucose test.
  • Page 19 SYSTEM FUNCTIONS Sample Tip Apply blood sample here. Electrodes Insert this end of the test strip into the test strip port of the meter with the electrodes Gmate® Test Strip facing up.

  • Page 20: Lancing Device

    SYSTEM FUNCTIONS Lancet Carrier Lancet Holder Lancet Ejector Adjustable Cap Clear AST Cap * Sliding Barrel *Clear AST cap is an optional accessory. Please contact Gmate® Customer Service at 1-855-GO-GMATE Lancing Device (1-855-464-6283).

  • Page 21: Installing The Gmate™ Smart App

    The Gmate® SMART may only be used with the Gmate™ SMART App. The Gmate™ SMART App is a free download from the App Store. The App Store can be accessed through iTunes or by tapping the App Store icon on your iPhone, iPad or iPod touch.
  • Page 22 INSTALLING THE GMATE™ SMART APP Select the Search Tab and type “Gmate Smart”. Select the Gmate™ SMART App and Install. Once the App is installed, fill out the fields in the User Information section.
  • Page 23 INSTALLING THE GMATE™ SMART APP Tap the information icon to edit and view your User Information, Statistics, Unit of Measure, Doctor’s email address, Measurement display settings and Product Information.
  • Page 24 INSTALLING THE GMATE™ SMART APP User Information - Update this section with your personal information. Touch the uppermost button and type in your first name. When complete, touch Done. Touch the button below and type in your last name. When complete, touch Done.
  • Page 25 INSTALLING THE GMATE™ SMART APP Select the Settings button to go back to the Settings mode. Select LIST to exit Settings Mode. Statistics - Details a list with the following Statistics: • Total measure count – total number of times you have tested •...
  • Page 26 INSTALLING THE GMATE™ SMART APP Unit Touch the Unit button to turn Auto Set on or off. When Auto Set is on, the measuring unit will be set automatically according to the user’s current region. Doctor’s Email Address Touch the Doctor’s email address button and type your...
  • Page 27 INSTALLING THE GMATE™ SMART APP Measurement Display Settings Touch the Measurement Display Settings button to adjust the color your test results will be displayed in. Touch and slide the two circles to adjust the desired range. Test results below the selected range will appear in yellow.
  • Page 28 Gmate™ SMART App. Consult your doctor or healthcare provider for all health-related concerns. For instructions on how to use the Gmate™ SMART App, read the instructions built into the App. Important: The Gmate ™ SMART App will store health-related information on your iPhone, iPad and iPod touch.

  • Page 29: Testing Your Blood Glucose

    • Gmate® Test Strips • Lancing Device • Sterile Lancets • iPhone, iPad or iPod touch with the Gmate ™ SMART App installed Important: Practice good hygiene before and after use. All parts of the kit are considered biohazardous and can potentially transmit infectious diseases, even after you have...
  • Page 30 Use only Gmate® Blood Glucose Test Strips. Wash the puncture site with soap and water before sampling. Make sure the Gmate® SMART Meter and test strips are about the same temperature before you test. Room temperature is best. Close the test strip vial after use to avoid contamination and damage.
  • Page 31 Canada and some European countries, you should use mmol/L; your result will always have a decimal point. If the meter is not set to mg/dL when first purchased, do not use the meter. Contact Customer Service at 1-855-GO-GMATE (1-855-464-6283) for assistance.

  • Page 32: Collecting A Blood Sample

    TESTING YOUR BLOOD GLUCOSE Collecting a Blood Sample STEP 1 Wash your hands with soap and warm water. Dry your hands thoroughly. Make sure puncture site is completely dry. STEP 2 Take your lancing device. Hold firmly and twist off the device cover by turning it counter-clockwise.
  • Page 33 TESTING YOUR BLOOD GLUCOSE STEP 3 Insert a new sterile lancet into the bottom of the lancet carrier. STEP 4 Twist off the protective cap from the lancet. STEP 5 Replace the lancing device cover.
  • Page 34 TESTING YOUR BLOOD GLUCOSE STEP 6 Select the desired puncture depth by turning the adjustable tip: 1-2 for delicate skin 3 for normal skin 4-5 for thick or calloused skin STEP 7 Place the end of the lancing device against the puncture site.
  • Page 35 TESTING YOUR BLOOD GLUCOSE STEP 8 After you perform your blood glucose test, twist off the device cover and remove the lancet. Dispose of the lancet in an approved sharps container. Replace the lancing device cover. Caution • Do NOT reuse lancets. Lancets are for single-use only.

  • Page 36: Testing With A Fingertip Sample

    TESTING YOUR BLOOD GLUCOSE Testing with a fingertip sample STEP 1 Tap the Gmate™ SMART icon to open the App. If the Gmate™ SMART App is not installed, install the App (See page 19 for instructions).
  • Page 37 TESTING YOUR BLOOD GLUCOSE STEP 2 Insert the Gmate® SMART Meter into the headphone jack of your iPhone, iPad or iPod touch. You will see a volume control box appear on the screen. The Gmate® SMART requires maximum volume. Set the iPhone, iPad or iPod touch to maximum volume to make sure the Gmate®...
  • Page 38 TESTING YOUR BLOOD GLUCOSE STEP 3 Insert the Gmate® Test Strip with the electrode end facing up into the test strip port of the Gmate® SMART Meter. Make sure the test strip is gently inserted all the way. Do not force...
  • Page 39 TESTING YOUR BLOOD GLUCOSE STEP 4 “Apply Sample” will appear letting you know the meter is ready to test. To mark the test result as a control solution test, slide the button at the bottom of the screen.
  • Page 40 Use the lancing device to obtain a blood sample. Place the blood from your finger to the tip of the Gmate® Test Strip. Do NOT press your finger against the test strip. The test strip will automatically draw the blood. Keep your finger on the test strip while the meter is measuring the sample.
  • Page 41 0.5 microliter (real size “ ”). Please make sure that the blood sample completely lls the designated area of the Gmate® Test Strip. STEP 6 Do not remove the test strip until this is complete. The reading will take 5 seconds.
  • Page 42 TESTING YOUR BLOOD GLUCOSE STEP 7 Your test result will be displayed on the screen of the iPhone, iPad or iPod touch when the test is complete.
  • Page 43 TESTING YOUR BLOOD GLUCOSE STEP 8 Add a note to your result by selecting the appropriate icon. Choose from pre meal, post meal, exercise, medication or stress. Make your selection and save. The note will be attached to that blood glucose reading. You may also type in a custom comment.
  • Page 44 TESTING YOUR BLOOD GLUCOSE Unexpected Results If your test result is above 600 mg/dL, “HIGH” will appear on the display screen. If your test result is below 20 mg/dL, “LOW” will appear on the display screen. Immediately contact your doctor or healthcare provider if you receive a “HIGH”...
  • Page 45 TESTING YOUR BLOOD GLUCOSE Repeat the test: • If your test result is below 50 mg/dL or above 250 mg/dL. • If your second test result is also unusual, perform a control solution test. (see Control Solution testing in this Owner’s Manual on page 60). Retest your blood. •...
  • Page 46 TESTING YOUR BLOOD GLUCOSE The American Diabetes Association suggests that the expected glucose values for persons without diabetes • Before eating < 100 mg/dL • Two hours after meals < 140 mg/dL Reference 1: American Diabetes Association (2013). Standards of Medical Care in Diabetes – 2013. Diabetes Care, 36 (Suppl 1): January 2013: S11-S66.
  • Page 47 TESTING YOUR BLOOD GLUCOSE Caution for Gmate® Blood Glucose Test Strips • Store the test strips in a cool, dry place between 36°F and 90°F (2°C and 32°C). • Keep away from direct sunlight and heat. • Do NOT leave the test strip vial open. This may damage the test strips, causing inaccurate test results.

  • Page 48: Alternate Site Testing

    Upper Arm, Forearm, Palm, Thigh or Calf. Getting a blood sample from these “alternate Forearm sites” may be considered less painful than your fingertip. The following figure shows the areas where you can test your blood with the Gmate® Fingertips SMART. Thigh Calf...
  • Page 49 ALTERNATE SITE TESTING Important Information About Using Alternate Site Blood Samples • Check with your doctor or healthcare provider before using alternate sites for testing. • Avoid moles, veins, bones and tendons. • If you test during or after a meal, it can change your test results. Exercise can also affect your blood glucose results.
  • Page 50 ALTERNATE SITE TESTING • Alternate site testing should NOT be used to make insulin dosing calculations . • Alternate site testing is NOT recommended for people with frequent hypoglycemia. • Alternate site testing may fail to detect hypoglycemia (insulin reactions). Use fingertip samples if you are hypoglycemic, especially when operating a vehicle.
  • Page 51 ALTERNATE SITE TESTING Collecting a blood sample from alternate sites is different than fingertips. Insert a sterile lancet into the lancing device. Place the lancing device against the designated puncture site and hold the lancing device continuously for a few seconds.
  • Page 52 The volume of the blood sample must be at least 0.5 microliter (real size “ ”). Please make sure that the blood sample completely fills the designated area of the Gmate® Test Strip. Refer to page 27 for Collecting a Blood Sample and Testing your Blood Glucose.

  • Page 53: Reviewing Results

    REVIEWING RESULTS The Gmate™ SMART App can store a lifetime of test results. The test results are stored in your iPhone, iPad or iPod touch. You can review your test results with or without the Gmate® SMART connected to your iPhone, iPad or iPod touch.
  • Page 54 REVIEWING RESULTS STEP 2 The Gmate™ SMART App displays your test results in a list format and in order by date and time stamp. Your most recent blood glucose result displays at the top of the list. Scroll down to view older test results.
  • Page 55 REVIEWING RESULTS STEP 3 Touch a blood glucose reading on the list to view a more detailed description of your test result.
  • Page 56 REVIEWING RESULTS Important: If you would like to e-mail or SMS (text message) your test results, Touch the Forward button at the bottom of the screen and select the results on the list that you would like to send. Touch the Forward button, select the test result, and Touch Send E-Mail to email the selected test result to your doctor or healthcare provider.
  • Page 57 You will be able to view your average test results in graph format. The Gmate™ SMART App creates a graph view of your average blood glucose test results by selecting: Day, 7 Days, 14 Days, 30 Days, or 60 Days.
  • Page 58 Select the period of time you would like to view your averages at the top of the screen. Note: With the Gmate™ SMART App, you can send your test results by e-mail or SMS (text message). Touch the Forward button to send your test results.
  • Page 59 REVIEWING RESULTS Touch Send selected range by email to send a range of test results to your doctor or healthcare provider. Tap on the screen and slide your fingers to select the range. Once you’ve selected your desired range, touch Done to email the results to your doctor or healthcare provider.
  • Page 60 REVIEWING RESULTS To send a group or full list of test results, touch the Forward button to send your test results. Select the test results you would like to send by tapping on the circle next to the test result. A check mark will mark the test result.
  • Page 61 REVIEWING RESULTS Once results are selected, touch the Send button. To send your test results in pdf file format, touch PDF FILE. To send your test results in csv file format, touch CSV FILE. Note: A group or full list of test results can only be forwarded by e-mail in a pdf or csv file format.

  • Page 62: Control Solution Testing

    CONTROL SOLUTION TESTING The Gmate® Control Solution contains a known amount of glucose. It is used to verify that the meter and the test strips are working properly. (Level 2 Control Solution is included in the kit.) The Gmate® Control Solution is available in three levels: Level 1, Level 2, Level 3.
  • Page 63 CONTROL SOLUTION TESTING Important: • Only use Gmate® Control Solution with your Gmate® SMART Meter. • Control Solution test must be done at room temperature: 68°F-77°F (20°C-25°C). • Make sure the meter, test strips and control solution are at room temperature before testing.
  • Page 64 CONTROL SOLUTION TESTING How to test with the Control Solution: STEP 1 Tap the Gmate® SMART icon on your iPhone, iPad or iPod touch to open the App. If the Gmate™ SMART App is not installed, install the App (See page 19).
  • Page 65 CONTROL SOLUTION TESTING STEP 2 Insert the Gmate® SMART Meter into the headphone jack of your iPhone, iPad or iPod touch. You will see a volume control box appear on the screen. The Gmate® SMART requires maximum volume. Adjust to maximum volume to make sure the Gmate®...
  • Page 66 CONTROL SOLUTION TESTING STEP 3 Insert the Gmate® Test Strip with the electrode end facing up into the test strip port of the Gmate® SMART Meter. Make sure the test strip is gently inserted all the way. Do not force...
  • Page 67 CONTROL SOLUTION TESTING STEP 4 “Apply Sample” will appear letting you know the meter is ready to test. Slide the button at the bottom of the screen. This will mark the test result as a control solution test.
  • Page 68 CONTROL SOLUTION TESTING STEP 5 The picture of control solution test will be displayed on the screen.
  • Page 69 Place the tip of the test strip to the control solution. The meter will start calculating the result. Please make sure that the control solution sample completely fills the designated area of the Gmate® Test Strip.
  • Page 70 CONTROL SOLUTION TESTING Note: If you mark the test as a Control Solution test, the results will NOT be included in your average results. STEP 7 Do not remove the test strip until this is complete. The reading takes 5 seconds.
  • Page 71 CONTROL SOLUTION TESTING STEP 8 The control solution test result is displayed on the screen when the test is complete.
  • Page 72 CONTROL SOLUTION TESTING STEP 9 Compare the control solution test result to the control solution range printed on the test strip Control Test Range 80-120mg/dL vial. If the result is not within the range indicated on the test strip vial, the meter and test strips may not be working properly.
  • Page 73 If you continue to get results outside the range on the test strip vial, do NOT use the meter, test strips or control solution. Call Gmate® Customer Service Support toll-free, 24 hours a day, 7 days a week at 1-855-GO-GMATE (1-855-464-6283).

  • Page 74: Caring For The Gmate® Smart

    Checking the Expiration of Test Strips and Control Solution The Gmate® Test Strips and Control Solution have expiration dates on the vials. When you first open the vials, record the discard date (3 months after first opening) on the vial...
  • Page 75 Your Gmate® SMART Meter should be cleaned and disinfected at least once a week, or when blood, dirt, or any visible residue is on the meter, lancing device or iPhone, iPad or iPod touch, for a total of two cleaning and disinfection cycles per week.
  • Page 76 CARING FOR THE GMATE® SMART Cleaning and disinfection are different. Cleaning removes dirt and blood, but does not kill germs. You should always clean your meter, lancing device, and iPhone, iPad or iPod touch before disinfecting, which does kill germs. Disinfection is the only way to reduce your exposure to disease.
  • Page 77 CARING FOR THE GMATE® SMART Cleaning: Clean the meter, lancing device and iPhone, iPad or iPod touch by wiping it with CaviWipes™ towelettes. Insert the meter into the iPhone, iPad or iPod touch device. Wipe the outside of the meter, lancing device and iPhone, iPad or iPod touch. Before you begin, squeeze out any excess liquid from the towelette so that it is damp but not dripping wet.
  • Page 78 CARING FOR THE GMATE® SMART How to use the Caviwipes™ to Clean and Disinfect Gmate® SMART Meter Lancing Device iPod touch iPhone iPhone iPad...
  • Page 79 CARING FOR THE GMATE® SMART To achieve disinfection of all the stated efficacy claims, let the solution sit on the meter, lancing device and iPhone, iPad or iPod touch. Do this for at least 2 minutes. Allow the meter, lancing device and iPhone, iPad or iPod touch to dry completely before use.
  • Page 80 CARING FOR THE GMATE® SMART Your Gmate® SMART System has an expected life of five (5) years. It should withstand the cleaning and disinfecting recommended in this Owner’s Manual. “We cleaned and disinfected the Gmate® SMART Meter, lancing device, and iPhone, iPad, and iPod touch with CaviWipes™...
  • Page 81 Gmate® Customer Service Support for a replacement, 24 hours a day, 7 days a week at 1-855-GO-GMATE (1-855-464-6283).
  • Page 82 CARING FOR THE GMATE® SMART Caution • Place the Gmate® SMART Meter in the carrying case and store it in a cool and dry place. • Keep out of reach of children. • Do not store in the refrigerator. Do NOT freeze.
  • Page 83 If you are a home health aide, family member or caregiver providing help to the owner of this Gmate® SMART Blood Glucose Monitoring System, it is important to prevent the spread of diseases. Always clean and disinfect the meter, lancing device, and iPhone, iPad or iPod touch following the steps on pages 73-81 before assisting the owner of this Gmate®...

  • Page 84: Error Messages

    ERROR MESSAGES Unexpected results If your test result is below 20 If your test result is above 600 mg/dL, “LOW” will appear on mg/dL, “HIGH” will appear on the display screen. Repeat the the display screen. Repeat the test. If the result is still "LOW" test.
  • Page 85 ERROR MESSAGES Used strip error Temperature error The test strip has already been Indicates that the used. Repeat the test with a environmental temperature is new test strip. ABOVE or BELOW the system operational range. System operational range is 50°F – 104°F (10°C –...

  • Page 86: Troubleshooting

    Meter is not inserted right. Insert the Gmate® SMART Meter again. Make sure that the meter is inserted all the way in. If the problem persists, contact Gmate® Customer Service Support toll-free at...
  • Page 87 Probable Cause The meter is defective. Disconnect the device and then reconnect. The meter does not light up. If the same problem continues, contact Gmate® Customer Service Support toll-free at 1-855-GO-GMATE (1-855-464-6283). Protective phone covers. Remove the phone cover. Repeat the test.
  • Page 88 Repeat the test with a new test strip. If the same problem persists, contact Gmate® Customer Service Support toll-free at 1-855-GO-GMATE (1-855-464-6283). Blood or foreign objects put into the test Contact Gmate® Customer Service Support toll-free strip port. at 1-855-GO-GMATE (1-855-464-6283).
  • Page 89 TROUBLESHOOTING Test does not start after applying the blood sample. Probable Cause Blood sample is too small. Repeat the test with a new test strip with a larger blood sample.

  • Page 90: Gmate® Smart Meter Specifications

    GMATE® SMART METER SPECIFICATIONS Model PG-101 (Gmate® SMART Blood Glucose Monitoring System) Test Method Electrochemical sensor Calibration Method Plasma Sample Whole blood, capillary Sample Size 0.5 L Test Time 5 seconds Memory No limit (One test result is approximately 80 bytes stored in memory of your device) Result Range 20-600 mg/dL (0.6~33.3 mmol/L)
  • Page 91 • The Gmate® SMART Meter has been tested for electromagnetic emissions in IEC 61326. Warranty Philosys warrants that your Gmate® SMART Meter will be free of defects in materials and workmanship for one (1) year, from the date of purchase. The warranty extends only to the original purchaser and is not transferable.
  • Page 92 Distributed by philosys, Inc. Address New York, NY 10010 USA Tel 855-GO-GMATE (855-464-6283) Fax 800-939-8670 E-mail info@gmate.com www.Gmate.com Rev. Date 2014-05 Printed in Korea Gmate® is a registered trademark of philosys, Inc. Patents Pending. 2014 philosys, Inc. All rights reserved.

Table of Contents