Subscribe to Our Youtube Channel
Related Manuals for Gmate WHeeL System
Summary of Contents for Gmate WHeeL System
- Page 1 User's Guide Thank you for purchasing the Gmate™WHeeL System. Please read this User's Guide thoroughly before using, and ensuring correct operation. Please keep this User's Guide in safe place for your future reference.
-
Page 2: Table Of Contents
Table of Contents Gmate™WHeeL is very easy to carry around and used for measuring the glucose level by whole blood whenever you need. It is also very simple, easy to use and smart. You don't worry About Gmate™WHeeL about coding your meter, the Gmate™WHeeL does it Before Starting automatically. -
Page 3: In Vitro
About Gmate™WHeeL Before Starting Gmate™WHeeL includes: Symbols Caution, see instructions for use Single use only Expiration date Serial number Lot number In Vitro Diagnostic medical device Manufacturer Authorised representative 1. Gmate ™ WHeeL Meter 2. Carrying Case Symbol for temperature limitation 3. - Page 4 There are two types of glucose units: mg/dL and mmol/L. Your Electrodes Gmate™ meter does not allow you to change the glucose unit Insert into test strip slot while facing up. yourself in order to prevent misinterpretation of the test results.
- Page 5 Names and Functions Names and Functions Data Port 1. Indicates strip code number. Transfer test results to computer(Cable is AvgMemSet 2. Displays current mode. optional.) 3. Warning when the battery is low or need to be replaced. 4. Display test results and messages. 5.
-
Page 6: Cautions
Keep the Gmate™WHeeL out of children’s for Meter reach. When a children swallowed battery Cautions The Gmate™WHeeL is intended for use or battery cover accidentally, consult with a for System in vitro outside the body ( diagnostic use) doctor immediately. -
Page 7: Obtaining Blood Drop
Cautions Obtaining Blood Drop Cautions Store Gmate™ Test Strip in a cool, dry place for Test Strip between 2°C and 32°C(36°F and 90°F). STEP 1 Keep away from direct sunlight and heat. Wash and cleaning your hands carefully with soap and warm water for increasing After taking a test strip out of the container, the blood circulation in finger vein. - Page 8 Obtaining Blood Drop Obtaining Blood Drop STEP 3 STEP 7 Set the lancing depth by rotating the cap. Insert a new sterile lancet into the lancet 1-2 for soft or thin skin, 3 for average skin, holder. 4-5 for thick or calloused skin. STEP 4 STEP 8 Place the lancing device on finger tip.
-
Page 9: About Alternate Site Testing
About Alternate Site Testing About Alternate Site Testing Caution : Do not test on alternate sites : Gmate™WHeeL can measure a blood sample from your when you think your blood glucose level is changing rapidly, Upper arm, Forearm, Hand, Thigh or Calf alternatively. Obtaining such as within two hours of exercise, a rapid-acting insulin a blood drop from these “alternate site”... -
Page 10: Testing Your Blood Glucose
STEP 4 Touch the drop to test strip tip, and hold STEP 1 until the Gmate™WHeeL beeps. Blood Insert the test strip while electrode end sample is drawn into test strip. facing up into the test strip port until stop. - Page 11 "HI" is displayed. physician or healthcare professional immediately. When the test result is lower than 10 If unexpected results are continued, check Gmate™WHeeL by mg/dL(0.5 mmol/L), "Lo" is displayed. control solution. See Control Solution Testing(page 22). Range of expected results...
-
Page 12: Control Solution Testing
Gmate™ Control Solution contains a known index of glucose and same as printed code of the test strip is used for checking that the Gmate™WHeeL and test strips are container. If displayed code number is working properly or not. Control solution is optional. -
Page 13: Reviewing Results
Gmate™WHeeL. mg/dL If your control solution test results are out of the range continuously, do not use the Gmate™ WHeeL, the test strips and/or the control solution. Please contact the local distributor. Important : STEP 8 If there is no result, “- - -”... - Page 14 STEP 6 STEP 4(To review average) Press both '<' and '>' buttons together to To review your 30-day result average, turn the Gmate™WHeeL off. press and release '<' button while a strip mg/dL symbol is blinking. Pressing and releasing the '<' button allow you to scroll forward to 14-day and 7-day averages.
-
Page 15: Setting The Meter
Setting the Meter Setting the Meter STEP 4 During the day is flashing, press and release STEP 1 the button until the correct day appears. Press both '<' and '>' buttons together for 3 Decreasing by '<' button, and increasing by seconds. - Page 16 '<' and ‘>’ release the button to select beeper-on or buttons together to finish setup and turn off beeper-off. Press and release '<' and '>' the Gmate™WHeeL. buttons together to move to the “alarm” setting. STEP 10 During "On"...
-
Page 17: Replacing The Battery
"+" side facing down. test strip. Caution : Dispose of battery This error message indicates the Gmate™ according to your local WHeeL has problem. Review the environmental regulations. -
Page 18: Troubleshooting
Error Messages Troubleshooting Battery is low, still but you can do a few Meter does not enter the test mode after inserting a test strip. tests. Replace the battery as soon as Probable cause What to do possible. The battery is out. Replace the battery. -
Page 19: Performance Characteristics
Within run precision(100 venous blood tests per glucose level) Clinical accuracy Mean glucose Standard Coefficient of The Gmate™ System is calibrated to yield results equivalent to deviation variation(%) plasma glucose concentrations and is traceable to a NIST 43 mg/dL(2.3 mmol/L) 1.3 mg/dL(0.07 mmol/L) -
Page 20: Caring For System
Caring for System Cleaning your meter To clean up your meter, wipe the outside with a soft cloth, Your Gmate™WHeeL is maintenance-free. dampened with water and mild detergent. Do not use alcohol or Storing your system any chemical solvent. Do not remain any liquids, dirt, dust, blood Store your meter, strips and control solution in your carrying case or control solution inside of the test slot. -
Page 21: Specifications
IEC 61326. Calibration Method Plasma-equivalent Warranty Sample Whole blood capillary Philosys warrants that your Gmate™WHeeL meter will be free of Sample Size 0.5 L μ defects in materials and workmanship for 5 years, valid from the Test Time 5 seconds date of purchase. - Page 23 Obelis SA philosys Co., Ltd. Boulevard Général 827-3, Sangpyeong-ri, Wahis 53 1030 Okgu-eup, Gunsan-si, Brussels, Belgium Jeollabuk-do, Korea + 32 2 732-59-54 +82-63-453-1421 + 32 2 732-60-03 +82-63-453-1423 Email mail@obelis.net Email help@gmate.biz 0602R8 Rev. Date 2014-12 Printed in Korea...
Need help?
Do you have a question about the WHeeL System and is the answer not in the manual?
Questions and answers