Troubleshooting
1.
If the range hood or halogen light does not operate
after installation:
2.
The range hood vibrates when the blower is on:
3.
The blower or fan seems weak:
4.
The lights work but the blower is not spinning at all,
is stuck or is rattling.
5.
The hood is not venting out properly:
NOTE: For all other inquiries, please contact us. Our contact information can be found on the back cover.
•
Check if the range hood has been plugged in, make
sure that all power has been turned back ON, fused
not blown and all electrical wiring are properly con-
nected.
•
Swap out light assembly to working ones to deter-
mine whether it is caused by defective bulbs. See
Replacing the light bulbs on Page 22.
•
The range hood might not have been secured prop-
erly on to the ceiling or wall.
•
Check that the duct sized used is at least 6" or 3-1/4
x 10". Range hood WILL NOT function efficiently
with insufficient duct size. For example: 7" duct
over 6" hole and loosely secured.
•
Check if duct is clogged or if damper unit (half-cir-
cular flapper) is not installed correctly or opening
properly. A tight mesh on a side wall cap unit might
also cause restriction to the air flow.
•
The blower might be jammed or scraping the bot-
tom due to shipping damage. Please contact us im-
mediately.
•
Make sure the distance between the stove top and
the bottom of the hood is within* 27" and 30" in
distance. *Due to different ceiling height configura-
tions, recommended height may not be applicable.
•
Reduce the number of elbows and length of duct
work. Check if all joints are properly connected,
sealed, and taped.
•
Make sure the power is on high speed for heavy
cooking.
Page 15