Bossino alliance pro 30" wall mount range hood (26 pages)
Summary of Contents for bossino Supreme Pro
Page 1
Installation Guide and Users Manual Supreme Pro 30" Wall Mount IMPORTANT: Read and save these instructions. NOTICE: Installer: Leave this guide with the homeowner Homeowner: Keep this guide for future reference Wall Mount Range Hood...
Important Safety Notice Read all Instructions before Installing and operating this appliance • The installation in this manual is intended for qualified installers, service technicians or persons with similar qualified background. Installation and electrical wiring must be done by qualified profession- als and in accordance with all applicable codes and standards, including fire-rated construction.
Page 3
Important Safety Notice Read all Instructions before Installing and operating this appliance • Clean ventilating fan frequently. • Always use appropriate cookware and utensils size. • Always use cookware appropriate for the size of the surface element. To reduce the risk of injury to persons in the event of a stove top grease fire: •...
Table of Contents INSTALLATION USE AND CARE Troubleshooting...........17 Tools needed............3 Use and care information.......18 Parts supplied...........4 Specifications..........18 Venting requirements........5 MAINTENANCE Mount heights & clearance......5-6 Cleaning..........19 Calculating vent system length.......6 Replacing filter & light bulb......19 Venting methods & ductless conversion..7 WARRANTY Charcoal filters &...
Venting Requirements Height & Clearance • Vent system must terminate to the outside Mounting (roof or side wall). Maximum* ceil- Bracket • DO NOT terminate the vent system in an at- ing clearance Standard 110” at 31” hood tic or other enclosed area. Upper mounting height •...
IMPORTANT: • A minimum of 6” round (standard for this range hood) or 3-1/4 x 10” rectangular duct (purchased separately) must be used to maintain maximum airflow efficiency. • Always use rigid type metal/aluminum ducts if available to maximize airflow when connecting to provided duct.
Venting Methods • This range hood is factory set for venting through the roof or wall. For non-vented (re-circulating) installa- tions, see Ductless Conversion on Page 7. • Vent work can terminate either through the roof or wall. To vent through a wall, a 90° elbow is needed. IMPORTANT: •...
Charcoal Filter Installation NOTE: The charcoal filters are preinstalled if you purchased the range hood with re-circulating kit from us. Remove stainless steel baffle filters on hood. Remove the safety filter under the stainless steel baffle filters by unscrewing two screws, then position the charcoal filter and align the screw holes, reinstall and fasten two screws.
Preparation WARNING Excessive Weight Require three or more person to move and install this range hood. Spinal or other bodi- ly injuries could occur if it is not followed. Advanced Preparations: Read the entire installation guide and users manual thoroughly, understand instructions and warnings. Be familiar with the controls of the range hood by reading through Range Hood Operations, Page 12.
Installation WARNING Installations (refer to Page 4 for parts): Measure the distance between stove top and the bottom of Excessive Weight range hood. A distance of 28” to 31” is recommended*. Require three or more person to move and *Due to different ceiling height configurations, recom- install this range hood.
Installation (Continued) Connect the range hood to a designated standard outlet (please refer the product label for the suitable voltage of this unit) or cut off the plug and connect three wires (black, white and green) to house wires and cap with wire connectors. Connect according to colors (i.e.
Range Hood Operations Power Light Power-Off Delay Increase Value Decrease Value Power-Off Delay Digital Timer Blower Speed Indicator Cleaning Reminder Indicator This range hood is designed to remove smoke, cooking vapors and odors from the cook top area. For best results, start the range hood before cooking and allow it to operate several minutes after the cooking is completed to clear all smoke and odors from the kitchen.
Range Hood Operations (Continued) Power Light Power-Off Delay Increase Value Decrease Value Power-Off Delay Digital Timer Blower Speed Indicator Cleaning Reminder Indicator • Controls: • Adjusting the timer function: Decrease Value button over 3 seconds to • While the blower (motor) is not running, press and hold enter timer mode.
Measurements and Diagrams Installation Overview: Mounting Bracket Qty: 6 PCS Qty: 6 PCS (For sheet rock only) Re-circulating kit exhaust (Re-circulating kit not shown) Upper chimney Glass Canopy Screw Qty: 4 PCS (Optional with glass canopy) Duct work and electric wiring region Qty: 4 to 8 PCS Lower chimney...
Page 17
Measurements and Diagrams (Continued) • All inch measurements are converted from millimeters, thus inch measurements are estimated. Overall: AP238-PSF AP238-PSD AP238-PSZ AP238-PSL Page 16...
Troubleshooting If the range hood or halogen light does not operate • Check if the range hood has been plugged in, make after installation: sure that all power has been turned back ON, fused not blown and all electrical wiring are properly con- nected.
Use and Care Information Operations: • Read and understand all instructions and warnings in this manual before operating the appliance. Save these instructions for future reference. • Always leave safety grills and filters in place. Without these components, operating blowers could catch on to hair, fingers and loose clothing.
Maintenance SAFETY WARNING: Never put your hand into area housing the fan while the fan is operating! For optimal operation, clean range hood and all baffle/spacer/filter/grease tunnel/oil container regularly. Regular care will help preserve the appearance of the range hood. Cleaning Exterior surfaces: •...
Warranty TO OBTAIN SERVICE UNDER WARRANTY: You must present proof of original purchase date. Please provide an original dated proof of purchase (sales receipt / invoice) in order to obtain service under warranty. One Year Parts Warranty: For one year from the date of original purchase, your local reseller will provide free of charge, non-consumable replace- ment parts or components that failed due to manufacturing defects.
Disclaimer Carefully inspect all items for damages before accepting delivery. note any damages on the freight bill or express receipt. request name and signature of the carrier’s agent and keep copy to support your claim. Upon acceptance of items, owner assumes responsibility for its safe arrival. Report damages to the carrier and file a claim immediately.
Page 23
Bossino Cook Till Your Hearts Content www.bossino.com...