Connecting To Wired Network - Sangean WFR-1 Operating Instructions Manual

Connecting to wired network

To setup the wired network:
1. Connect the radio to the wired network using an Ethernet cable
as shown.
2. Go to >Main menu> System setup > Internet setup > Wizard >
[Wired] from the menu selections.
3. Enter the password when prompted.
Rotate the Turning knob to highlight the text/number/symbol
Press the Turning knob to confirm.
< to delete
C to cancel and exit
to enter when you are done
4. The screen will show "Connected" when connection had been made.
If you have problems with your wired connection, the lights by the
LAN (RJ-45) connector may help you to identify the possible cause
of the problem:
Green ON = Link established, Flashing = Data transfer
Yellow ON = 100M bps link, OFF = 10M bps link
15