Attaching The Raincover - Bugaboo Bee User Manual

5
exploring
attaching the rain cover
Come rain or shine, the Bugaboo Bee can protect a child in any
setting. The snug-fitting and fully ventilated rain cover is sure to keep
the child dry, warm and comfortable.
1
Fully extend the Bugaboo Bee sun canopy.
2
Place the rain cover on the head-end of
the backrest.
3
Pull the rain cover over the sun canopy so
that the Bugaboo label on the rain cover
lines up with the Bugaboo label on the
Bugaboo Bee. It should fit snugly.
The rain cover has an elastic loop and a
4
hook on each side. Fasten these together
around the Bugaboo Bee chassis to secure
the rain cover in place.
5
Attach the touch fasteners around the chassis
just above the wheels for extra security.
34
6
Adjust the touch fastener in the middle of
the rain cover to adapt the cover to the
chosen seat position.
7
By attaching the touch fasteners you create
an air vent.
NOTE The rain cover will fit the Bugaboo Bee for
a child with a maximum bottom-to-head length
of 51cm/20.1 inches.