Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Digitus Professional DN-95321
Summary of Contents for Digitus Professional DN-95321
- Page 1 8-PORT 10/100MBPS PoE ETHERNET SWITCH Manual DN-95321...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Chapter 1 Product Introduction ..................... 2 1.1 Product Overview ......................2 1.2 Features ..........................2 1.3 Environments ........................2 Chapter 2 Installation ....................... 3 2.1 Installation method ......................3 2.2 Rack-mountable Installation ................... 3 2.3 Turn on the switch ......................4 2.4 Indicator LED ........................ -
Page 3: Chapter 1 Product Introduction
Congratulations on your purchasing of the switch . This switch provides a simple, economical, standard and high performance solution for you. Please read the entire user manual before using the product and save it for future reference. CHAPTER 1 PRODUCT INTRODUCTION 1.1 Product Overview The product is desktop design, all-metal chassis and elegant appearance. -
Page 4: Chapter 2 Installation
CHAPTER 2 INSTALLATION Before installing the switch, make sure that the following the "packing list" listed OK. If any part is lost and damaged, please contact your local agent immediately. In addition, make sure that you have the tools install switches and cables by your hands. ... -
Page 5: Turn On The Switch
Step 1 Step 2 2.3 Turn on the switch Please plug the power supply into the switch, the internal power system of the switch auto-regulate the working power according to the actual input power. When the switch is power on, the power indicator will be light on on the front panel of the switch shines. Note: Please confirm the voltage is correct before power on, otherwise the switch will be damaged. -
Page 6: Indicator Led
2.4 Indicator LED Status Description Power is supplied No power A valid link is established Link Blinking Data packets received No link is established There is a PoE PD connected to the port, which supply power successfully. No PD port connect to the port, or the power is not enough to supply PoE device to work on When the power output to PDs has reached or exceeded the maximum power budget. -
Page 7: Switch Connection To The Pd
2.6 Switch connection to the PD All ports of switch have POE power supply function, the maximum output power up to 30W each port, it can make PD devices, such as internet phone, network camera, wireless access point work, provide five levels of 3.84 ~ 25.5W electric power request. You only need to connect the switch POE port directly connected to the PD port by network cable CHAPTER 3 TROUBLE SHOOTING... -
Page 8: Appendix: The Standard Rj-45 Introduction
Appendix: The standard RJ-45 Introduction Please note that cable-making methods, because cable which does not meet the standards of the sequence data will make the data transmission speed slow, unstable and even be blocked, the following chart represents that the standard RJ-45 jack and the connector and pin definition: Standard RJ-45 jack / connector RJ-45 connector pin definitions... - Page 9 The standard cable, RJ-45 pin assignment The following shows straight cable and crossover cable connection,ordinary please use straight cable to connect switch/Hub or other devices: Straight cable for the switch (uplink MDI-II port) to switch/Hub or other devices connection Cross over cable for switch (MDI-X port) to switch/hub or other network devices (MDI-X port) connection.
Need help?
Do you have a question about the Professional DN-95321 and is the answer not in the manual?
Questions and answers