Subscribe to Our Youtube Channel
Related Manuals for Digitus DS-55317
Summary of Contents for Digitus DS-55317
- Page 1 Wireless Collaboration System Manual DS-55317 – Set: 2x Transmitter (TX), 1x Receiver (RX) DS-55322 – Additional Transmitter (TX)
- Page 2 1. Introduction The Wireless Collaboration System from DIGITUS® brings together all your devices (notebook, tablet, smartphone) and offers a hardware-based presentation solution for wireless transfer of screen content for meeting and conference rooms. Up to 30 participants can be connected with the receiver.
- Page 3 1x TX Desk Tray PC Requirements: DS-55317 supports devices with an HDMI port. It supports Windows and macOS PC systems. In case your PC doesn’t have an HDMI port (i.e. just equipped with USB-C™ ports), you can use an video adapter or docking station with HDMI interface.
-
Page 4: Product Specification
4. Product Specification Feature 1920x1080 (1080p60/50/30/25/24, 1080i60/50) Video input 1280x720(720p60/50) 720×576(576p50);720×480(480p60) Video decode and output Up to 4K60 (RX) Audio Stereo, 48KHz Wireless standard IEEE 802.11b/g/n/ac, 2.4G/5GHz, 2T2R Latency About 100ms latency HDMI Version HDMI 2.0 (RX) with HDCP2.1 Authentication Protocol WPA2 (WPAS-PSK / WPA2-Enterprise) Security AES 128 bit... -
Page 5: Product Overview
Temperature Range Operating: 0°C to + 40°C (+32°F to +104°F) Storage: -10°C to + 60°C (+14°F to +140°F) Humidity Operating: 10% to 80% relative humidity Storage: 5% to 90% relative humidity 5. Product Overview Transmitter HDMI® Type A Connect computer or other devices with HDMI Connect to computer or other devices USB 2.0 Type A for power... - Page 6 Receiver Micro USB 2.0, B Connect to 5V/2A adapter for power supply Connect with touch panel or mouse/keyboard 2x USB 2.0, A for KVM function Connect to TV, projector, and monitor by using HDMI®, A the HDMI cable RJ45 ( Connect to router/network for internet access Fast Ethernet Flashing blue: Waiting for connection...
-
Page 7: Connection Diagram
6. Connection Diagram Transmitter Receiver Smartphone/ Tablet Connection Cable Laptop Mouse 70 m max. Distance Keyboard Power supply TV / Beamer... -
Page 8: Receiver Installation
7. Receiver Installation 1. Power on the RX via USB power adapter and connect it to the display or projector by HDMI cable 2. Connect the USB cable to the display by USB cable (for touch panel control only) 3. Connect RJ45 cable to your RX to access the internet. Remark: ... - Page 9 Settings Click to enter setting page: 1) General Setup: user can select the language and check product version 2) Group Setup: user can adjust information shown while Multi-User Mode 3) Advanced Setup: Wi-Fi Password: set the SSID password HDMI Zoom: adjust the HDMI output size...
- Page 10 HDMI Resolution: set the HDMI output resolution 7.2 Multi Transmitter (TX) Management: When set to ON, the user logos and number of participants which are connected to the RX will be shown on the upper right corner of the main page of RX start screen Click logo, the TX (participants) list will be show on the display.
- Page 12 8. Pairing a Transmitter (TX) and Receiver (RX) The Wireless Collaboration System (DS-55317) includes 1x Receiver (RX) and 2x Transmitter (TX) units, which are paired already together. Normally you don’t need to pair them again. However, if you need to re-pair or buy an additional Transmitter (DS-55322), you need to follow the instruction below to pair the new transmitter with the receiver.
- Page 13 9.1 TX upgrade process: 1) Firstly, please make sure TX and RX already paired 2) Unzip the upgrade package, and copy “tx_image, tx_config.txt” file on the root of a Udisk/Memory stick (Fat32) 3) Connect the Udisk/Memory stick with RX USB port and then power on the 4) After RX enter the main page, power on TX (no need to connect the HDMI cable), then the TX will link with RX automatically 5) Then RX will send the upgrade file to TX for upgrade wirelessly, upgrade...
- Page 14 6) After upgrade down, the TX light will become flash blue, and “TX updated OK” message will display on the RX screen. 7) After the upgrade, please pair TX and RX again. (Please refer to TX and RX pair guide)
- Page 15 9.2 RX upgrade process: 1) Change the RX upgrade zip file’s name to “update”.zip (no need to unzip the file) and copy to the root of USB disk. 2) Connect the U disk with RX USB port and then power on the RX. 3) The RX will recognize the firmware and update message will be displayed on the screen, please click install for upgrade.
- Page 16 5) After RX update successfully, message will be displayed on the screen, you can chose to save or delete the file.
- Page 17 10. Wireless HDMI Transmitter (TX) Installation 1) Connect the HDMI and USB plug to the notebook’s inputs. 2) The LED indicator of the TX will turn red when it’s booting up. 3) The LED indicator will become blue and flashing when the TX is ready to stream.
- Page 18 11. Streaming from Smartphone/Tablet 1. iOS devices • Search RX (Receiver) SSID and connect in Wifi settings. (SSID: DIGITUS…, Password: 12345678), the is SSID shown on the left upper corner of the RX start screen • Use the screen mirroring function of the smartphone •...
- Page 19 • Make sure your android devices Wi-Fi is activated/available • Go to the Mirror/Share/Cast function of the smartphone • Choose RX (Receiver) DIGITUS-… to start sharing Remark: there are different names on different brands of phones or tablets: WIFI Display, WLAN Display, Wireless Display, Allshare Display, Allshare Cast, Wireless Display, MirriorShare, etc 12.
- Page 20 of the notebook will be shared to the big screen If there are two or more Transmitter, just click the button of the TX you want to share on your big screen. You can easily switch between various TX by pressing the button of the corresponding TX – easy click & share. ...
- Page 21 Only Wireless HDMI Transmitter (TX) in Split Screen | up to 4 Notebooks 1) Please connect the first Transmitter with the Receiver by short press the button on Transmitter, you will see the content of first TX on the big screen 2) To share the second Transmitter, please press the button on the second TX and hold it for 3-5 seconds, the Receiver screen will split to Multi-...
- Page 22 the content of the 2x TX and the Mobile Device on the big /RX) screen Remark: If you now want to add a second Mobile Device, just repeat the • steps for sharing Mobile Device on point 3) If you now want to add a third TX, just repeat the steps for •...
- Page 23 Display Group Setup Step3: Turn on Display Group function, all the receivers which are in the same subnet will be listed on the Device List, please select the receivers which you want to join the display group and confirm, then the screen will stream to other receivers...
-
Page 24: Touch Panel Control
Remark: macOS devices don’t support touch back control function. 15. White Board Function: DS-55317 supports instantly edit, draw and write on the big screen with touch panel Step 1: Click the White Board icon from the start screen of the RX on the to... -
Page 26: Important Safety Instructions
Frequency Range & Maximum Transmit Power WiFi Standard: 802.11b/g/n/ac 5G WiFi Channel: 36, 40 Core Frequency: 5180,5200 Range: 5170 ~ 5210MHz Bandwidth: 20/40MHz Transmitter power: 13 dBm max SW version: RX: 2.3.12, TX: 2.3.3 HW version: TX: S100TX-LC01-01 RX: G300RX-LC01-01 Important safety instructions Please read the following safety instructions carefully before installation and operation:... - Page 27 before cleaning 14. Clean the device with a lint-free cloth 15. To completely disconnect the system from the mains, the power supply unit must be unplugged from the socket. The power supply unit serves as a disconnecting device for separating the system from the mains. Disclaimer The terms HDMI and HDMI High-Definition Multimedia interface, and the HDMI Logo are trademarks or registered trademarks of HDMI...
Need help?
Do you have a question about the DS-55317 and is the answer not in the manual?
Questions and answers