Table of Contents
Advertisement
Your Touch Control Panel
The Touch Control Panel allows you to set the oven
8. POWER. Touch this pad before entering another
controls electronically with the touch of a finger. It's
power level number if you want to change from
designed to be easy to use and understand,
automatic power level 10 (High) for cooking or power
level 3 (Low) for defrosting.
When You Plug in the Oven
9. TIMER. This feature uses no microwave energy. It
functions as either a kitchen timer, as a holding period
The display panel displays five 8's, 18 POWER and all
after defrost or as a delay timer before time or
of the oven functions. After 15 seconds, all lights
temperature cooking.
disappear and "RESET" appears in the upper portion.
Touch the OFF/RESET pad, set the CLOCK and oven
10. OFF/RESET.
When touched, it shuts off the oven
is ready for use.
and erases all settings (except time of day).
If power is disrupted at any time, the above sequence
11. EXHAUST FAN. Press HI, LO or OFF for the
recurs, and you must reset CLOCK after touching the
different fan speeds.
OFF/RESET pad.
12. NUMBER PADS. Touch these pads'to enter
"PROBE"
Appears on the Display
cooking time, defrosting time, time of day, temperature
• Probe has been forgotten when Roast Code or Temp
or power level.
Cook function is being used.
13. COOK CODE CONTROL. Use this pad as a
short-cut method for entering cooking time and
• Probe is not securely seated in oven wall receptacle,
power level.
1. DISPLAY. Displays time of day, time or temperature
14. START. After all selections are made, touch this
during cooking functions, power level being used,
pad to start the oven.
cooking mode and instructions.
15. LIGHT. Touch ON to illuminate counter.
2. TIME COOK 1 & 2. Microwave for a preset
amount of time using automatic power level 10. (If
desired, you may change power level after entering
AUTOMATIC
FAN FEATURE
cooking time.)
Cooking appliances installed under the oven may, under
3. DEFROST. Gentle thawing at automatic power level
some heavy usage conditions, cause temperatures high
3 (Low). (If desired, you may change power level after
enough to overheat some internal parts of the
entering defrosting time.)
microwave oven.
4. TEMP COOK. Use the temperature probe to cook
To prevent overheating from taking place, the exhaust
by using a preset temperature. Once food reaches preset
fan is designed to automatically turn on at a low speed
temperature, oven switches to HOLD setting and
if excessive temperatures occur. Should this happen,
maintains that temperature until you touch the
the fan cannot be manually turned off, but it will
OFF/RESET pad.
automatically turn off when the internal parts have
5. COOK 'N WATCH. Use this pad for short-term
cooled. The fan may stay on up to approximately 30
cooking, which automatically turns off after 3 minutes,
minutes after the range and microwave oven controls
have been turned off.
6. ROAST CODE. Insert probe, touch this pad and
then number pad for desired code number to slow-cook
or temperature cook meat with automatic preset
program.
7. CLOCK. Touch this pad to enter time of day or
check time of day while microwaving. To set clock,
first touch CLOCK pad and then enter time of day.
For example, if time is 1:30, touch number pads 1, 3
and 0 and "1:30" will appear in display. Then touch
START pad, To reset or change time, simply repeat
above process.
6
Advertisement
Table of Contents
