VTech VT1040 User Manual page 8

Getting started
The charge capacity of rechargeable
batteries will reduce with time as they
wear out, so reducing the talk/standby
time of the handset. Eventually they
will need to be replaced. New batteries
are available from the VT1040 Helpline
on (852) 2776 3223.
Batteries and handset may become
warm during charging. This is normal.
Your VT1040 uses the
24 hour clock.
If you have more than one handset
registered to your base, you only need
to set the date and time on one
handset and the other handsets will be
automatically updated.
3
Set the date and time format
1. Press the Left soft key
2. Press or until the display shows
OK DATE & TIME
press soft key.
key again.
DATE FORMAT
3. is displayed, press the
current format is displayed. Press
DD-MM-YY
between and
you will hear a confirmation tone.
TIME FORMAT
4. Press and
key and the current format is displayed. Press
change between 24hr and 12hr. Press the
will hear a confirmation tone.
5. Press and hold the soft key to return to standby.
to open the main menu.
HS SETTINGS
is displayed, press the
OK
soft key and the
or to change
MM-DD-YY OK
. Press the soft key,
is displayed. Press the
OK
soft key, you
and
OK
soft
OK
soft
or to