Auto Exposure Bracketing (Aeb Mode); To Cancel The Aeb Mode - Canon PowerShot SX1 IS User Manual

Available Shooting Modes
I
Auto Exposure Bracketing (AEB Mode)
~
}} p.300
In this mode, the camera automatically changes the exposure within a
set range to take three shots at the same interval as continuous
shooting (p. 110). The images are shot in the following order: Standard
exposure, underexposure and overexposure.
Select AEB.
1. Press the
@
button.
2. Use the" or
+
button to
select ~ and use the" or
.. button to select
fJ.
3. Press the DISP. button.
Standard exposure
Compensation range
• The compensation range can
be set as wide as 2 levels
lower and 2 levels higher than the standard exposure value (the
compensated exposure value if exposure adjustment was
performed) at the center point in 1/3 increments. If exposure
adjustment (p. 136) is already done, setting can be done with
the adjusted value as the center point.
Adjust the
compensation range.
1. Adjust the compensation
range with the .. or ..
button.
2. Press the
@
button.
To Cancel the AEB Mode:
Select
IW
in Step 1.
4)
~~~
6:
~~t~~dr:~a::=~~:i~~:r:~:i= =r::d~aSh