Configuring The Camera; Power Saving Function - Canon PowerShot SX1 IS User Manual

I
Power Saving Function
Select [Power Saving].
1. Press the MENU button.
2. Use the .. or • button to
select the
iIi
menu.
3. Use the
+
or • button to
select [Power Saving].
4. Press the
~
button.
This camera is equipped with a power saving function, which can
automatically turn off the power or LCD monitor (or the viewfinder).
Auto Power Down When set to [On], the power will shut off in the
following circumstances. Press the power button again
to restore power.
Shooting mode: Approximately 3 minutes after the last
control is accessed on the camera.
Playback mode or when connected to a printer:
Approximately 5 minutes after the last control is
accessed on the camera.
Display Off
In shooting mode, the LCD monitor (or the viewfinder)
automatically turns off after the selected time if no
control is accessed, regardless of the [Auto Power
Down] setting. Press any button other than the power
button or change the camera orientation to turn the
LCD monitor (or the viewfinder) back on.
2
Make settings.
1. Use the
+
or • button to
select an option.
2. Use the .. or • button to
make settings.
3. Press the MENU button twice.