Page 1
External RF programmable room thermostat 411 Installation & Operating Instructions THESE INSTRUCTIONS TO BE RETAINED BY USER...
Page 2
RF411 Programmable Room-Thermostat Setting transmitter and receiver partnership 1) Connect the receiver as demonstrated in the installation manual. 2) Switch power onto the boiler. 3) Press and hold the black button on the receiver. The led will flash immediately. When the LED flashes for a second time, release the button.
Page 3
RF411 Programmable Room-Thermostat First Time setting or after renewing batteries. Using a pencil, gently depress the Re-set button in the center of the control panel. Wait 10 seconds or until ‘12.00’ appears on the right of the display. (This is the actual time setting). Setting the Time &...
Page 4
Setting the Program/s The display will now show a choice of five programs. P1 - P2 - P3 – P4 – Pd. P1 to P4 are pre-set programs and are therefore not adjustable. The program settings are as follows: P1: 07:00 a.m. - 23:00 p.m. P2: 06:00 a.m.
Other Functions: Program Override (party mode): To override the timed setting on the boiler, press the uppermost button until the icon appears on the display. This will ignore any current setting and allow the heating to remain on until the next programmed ‘off time’.
Page 6
Registered address: Vokèra Ltd Borderlake House Unit 7 Riverside Industrial Estate London Colney Herts AL2 1HG enquiries@vokera.co.uk www.vokera.co.uk www.vokera.ie Sales, General Enquires T 0844 391 099 F 0844 391 0998 Vokèra Ireland West Court, Callan Co Kilkenny T 056 7755057 F 056 7755060 Vokèra Limited reserve the right to change...
Need help?
Do you have a question about the 411 and is the answer not in the manual?
Questions and answers