Replacing Side Marker Bulbs - Ford ESCAPE Owner's Manual

Replacing Side Marker Bulbs

E142472
1. Remove the bulb socket from the
headlamp assembly by turning it
counterclockwise.
2. Remove the bulb by gently pull the
bulb straight out of the socket.
Install the new bulb in reverse order.
Replacing Fog, Park and Turn
Signal Bulbs
A
E142797
A Fog Lamp
B Park Lamp
C Turn Signal lamp
Escape (TM2) Canada/United States of America, enUSA, Second Printing
Maintenance
B C
E142798
1. Remove the screws from the splash
shield at the wheel well to gain access
to the lamp assembly.
E142799
2. Remove the bulb holder from the lamp
assembly by turning it
counterclockwise.
3. Disconnect the electrical connector.
4. Remove the bulb from the bulb holder
by pulling it straight out.
Install the new bulbs in reverse order from
the steps above.
231