Table of Contents
Advertisement
Section 4 - Configuration
On this page you can configure your Asynchronous Transfer Mode (ATM) settings. If you are unsure, you can obtain these settings from your ISP.
Interface:
Select the ATM interface from the drop-down menu.
VPI:
Enter the Virtual Path Indicator (0 - 255).
VCI:
Enter the Virtual Channel Indicator (32 - 65535).
Latency:
Select the latency from the drop-down menu.
Encapsulation:
Select the method of encapsulation provided by your ISP. You can
select LLC or VCMUX.
ATM QoS:
Select the Quality of Service type from the drop-down menu.
Click Save when you are done.
D-Link DSL-3590L User Manual
ATM
88
- Quick Links:
- Before You Begin
- Internet
Hide quick links:
Advertisement
Table of Contents
