D-Link AirPlus XTREME G DWL-G650 Manual page 40

Troubleshooting (continued)
6. The computer with the DWL-G650 installed is unable to connect to
the wireless network and/or the Internet.
!
Check that the LED indicators for the broadband modem are indicating
normal activity. If not, there may be a problem with the broadband
connection.
!
Check that the LED indicators on the wireless router are functioning properly.
If not, check that the AC power and Ethernet cables are firmly connected.
!
Check that the IP address, subnet mask, gateway, and DNS settings are
correctly entered for the network.
!
In Infrastructure mode, make sure the same Service Set Identifier (SSID)
is specified on the settings for the wireless clients and access points. The
SSID factory default setting for most D-Link products is default. (Double-
click on the WLAN icon in the taskbar. The Link Info screen will display
the SSID setting.)
!
In Ad-Hoc mode, both wireless clients will need to have the same SSID.
Please note that it might be necessary to set up one client to establish a
BSS (Basic Service Set) and wait briefly before setting up other clients.
This prevents several clients from trying to establish a BSS at the same
time, which can result in multiple singular BSSs being established, rather
than a single BSS with multiple clients associated to it.
A. Under Tools> select Folder Options...> select View > under
Hidden files and folders > select Show hidden files and
folders.
B. Uncheck Hide extension for known file types > click on
Apply.
C. Search for previously loaded driver files. Remove these files
from the INF and SYSTEM32 (DRIVERS) folders in the Windows
directory. Note: Windows XP and Windows 2000 will rename
.inf files that have not received WHQL certification into oem.inf
files (e.g., oem1.inf.)
40