Hardware Installation - Neurona OP500 User Manual

3.

Hardware Installation

The OP500 leverages the home's electrical wiring to create a whole home security and monitoring leverages the home's electrical wiring to create a whole home security and monitoring leverages the home's electrical wiring to create a whole home security and monitoring
network without the requirement of having a Wi-Fi network. To establish this security and network without the requirement of having a
monitoring network, please follow the
Before getting started, please make sure: Before getting started, please make sure:
• The Broadband router is connected to the Internet.
• The AX510 and AX520 ConnectedLife Adapters are plugged directl
outlet and not in a surge protector or power strip: outlet and not in a surge protector or power strip:
Step 1: Plug AX520 ConnectedLife Adapter to AC outlet anywhere in the house.
Step 2: Plug AX520 ConnectedLife Adapter to AC outlet and connect to router or broadband
modem with Ethernet cable (provided). em with Ethernet cable (provided).
Note: Make sure LEDs illuminate on both the AX510 ConnectedLife Camera and AX520 ConnectedLife adapters. Note: Make sure LEDs illuminate on both the AX510 ConnectedLife Camera and AX520 ConnectedLife adapters. Note: Make sure LEDs illuminate on both the AX510 ConnectedLife Camera and AX520 ConnectedLife adapters.
the step-by-step instructions below.
outer is connected to the Internet.
ConnectedLife Adapters are plugged directly into the wall's power
ConnectedLife Adapter to AC outlet anywhere in the house. ConnectedLife Adapter to AC outlet anywhere in the house.
ConnectedLife Adapter to AC outlet and connect to router or broadband ConnectedLife Adapter to AC outlet and connect to router or broadband
this security and
y into the wall's power
7