Important Information; Important Safety Notes - Neurona OP500 User Manual

1. Important Information

1.1. Important Safety Notes

This device is intended for connection to the AC power line. For installation instructions, refer to
the Installation section.
The following precautions should be taken when using this product:
Please read all instructions before installing and operating this product.
•
Please keep all instructions for later reference.
•
Please follow all warnings and instructions marked on the product.
•
For safety reasons, this device should not be installed in any electric socket when being
•
powered on to prevent the venting holes from facing the floor.
Unplug the Powerline device from the wall outlet before cleaning.
•
Use a dry cloth for cleaning. do not use liquid cleaners or aerosol cleaners.
•
Do not operates this device near water.
•
This device should never be placed near or over a radiator, or heat register.
•
This device relies on the building's electrical installation for short-circuit (over current)
•
protection.
Do not allow anything to rest on the device interconnect plug.
•
Do not place this device in a location where people may walk on the cords.
•
Because this device sends data over the power line, it is recommended that you plug it directly
•
into a power outlet.
Do not plug the device into a UPS or power strip with surge protection. (The device has its
•
own power filter for protection against surges.)
Only a qualified technician should service this device. Opening or removing covers may result
•
in exposure to dangerous voltage points.
Unplug the device from the wall outlet and refer the device to qualified service personnel if
•
the following occurs:
- If the interconnect cords are damaged or frayed.
- If liquid has been spilled onto the device.
- If the device has been exposed to rain or water.
- If the device does not operate normally when the operating instructions are followed.
- If the device exhibits a distinct change in performance.
3