1. Important Information 1.1. Important Safety Notes This device is intended for connection to the AC power line. For installation instructions, refer to the Installation section. The following precautions should be taken when using this product: Please read all instructions before installing and operating this product. •...
Key features of the Neurona OP500 include: • Scan the OP500's QR code into a mobile or tablet device, plug it into ANY outlet, and start Scan the OP500's QR code into a mobile or tablet device, plug it into ANY outlet, and start...
2.2. Description of Equipment 2.2.1. OP500 ConnectedLife Camera Camera Microphone Light Sensor 3.5mm Audio Output Jack Wide-Angle Lens Infrared LEDs Temperature Sensor Multi-color LED Night Light Internal Speaker microSD Card Slot 2.2.2. AX520 - ConnectedLife Camera Adapter Camera Adapter Power LED...
2.2.3. AX510 - ConnectedLife Adapter (Included in OP500 ConnectedLife Adapter (Included in OP500-B Starter Kit ONLY) Power LED Ethernet Link / Activity LED Group Button Group Button PLC Link LED Reset Button Reset Button Ethernet (LAN) Port net (LAN) Port 2.3.
Hardware Installation The OP500 leverages the home's electrical wiring to create a whole home security and monitoring leverages the home's electrical wiring to create a whole home security and monitoring leverages the home's electrical wiring to create a whole home security and monitoring network without the requirement of having a network without the requirement of having a Wi-Fi network.
3.1. Multi-Room Deployment One AX510 Adapter can support up to 7 up to 7 OP500 Cameras. You can place additional camera can place additional camera anywhere in the house where you have a power outlet where you have a power outlet. Simply plug the additional camera into wall...
OP500 Camera App Installation OP500 Camera App Installation The Neurona OP500 Camera is supported by both iOS and Android mobile devices. To install the The Neurona OP500 Camera is supported by both iOS and Android mobile devices. To install the The Neurona OP500 Camera is supported by both iOS and Android mobile devices.
Creating an Encrypted Camera Connection 5.1. Create a Private Encrypted Network Both the AX510 and the AX520 ConnectedLife Adapters are HomePlug AV compatible device. Every HomePlugAV compliant device has the same default network name, which enables them to communicate with each other without requiring any special user configuration. Users can easily create an encrypted network with 128-bit encryption for higher levels of security.
5.3. Removing an OP500 Camera from an Existing Network Group To remove an OP500 Camera from an existing encrypted ConnectedLife network, you can press the RESET button on the OP500 camera that you want to remove. This will return the OP500 back to its factory default settings.
Product Specifications Network Interface PLC PHY rate: Up to 500Mbps 32-bit RISC CPU with hardware video processing & Processor compression 1/4-inch CMOS sensor. automatically controls dynamic Image Sensor range, exposure, gain and white balance 1.3M pixel Lens 1280x720 @10 fps/ 1.5Mbps Video Quality Video Format H.264...
OP500 Camera, as shown below: , as shown below: • The status of the OP500 Camera's connection to the Internet can be determined using the The status of the OP500 Camera's connection to the Internet can be determined using the...