Satellite Link - Toshiba D-R420KU Owner's Manual

You can set the unit to start recording whenever it
detects the video signal from the external tuner.
Preparing for the satellite link timer recording:
Preparation on the tuner
• The external tuner should be equipped with some kind
of timer function. Using timer function of the tuner, set
it to output audio/video signals when it comes to the
time you want to start recording, and stop output audio/
video signals when it comes to the time you want to
finish recording. Refer to the tuner's manual on how to
set the timer.
• Make sure to set the satellite link standby mode when
you finish setting.
Preparation on this unit
• You must let the unit know which video input jack you
are using before making a recording.
Refer to "SETTINGS FOR THE VIDEO INPUT" on page 26.
OPEN/
CLOSE
.@/:
GHI
PQRS
TOP MENU
CLEAR
SKIP
PAUSE
TIME SLIP
REPEAT
42 42 EN EN
E7PCAUD_DR420KU_EN.indd 42 E7PCAUD_DR420KU_EN.indd 42

SATELLITE LINK

INPUT
SELECT HDMI
ABC DEF
JKL MNO
SATELLITE SATELLITE
LINK LINK
TUV WXYZ
TIMER
SPACE PROG.
SETUP DISPLAY AUDIO
MENU/LIST
ENTER
RETURN
REV FWD SKIP
PLAY STOP STOP
1.3x / 0.8x PLAY INSTANT SKIP
REC MODE REC ZOOM
SE-R0265
1
Select the desired recording mode.
(Refer to "Recording Mode" on page
33.)
2
Press [SATELLITE LINK].
In a second, the unit will be turned into the
standby mode automatically as it goes into the
satellite link standby mode.
To cancel the satellite link function while in
the satellite link standby mode:
Press [SATELLITE LINK] or [I/y ON/STANDBY].
To cancel the satellite link function while the
satellite link recording is in progress:
Press [STOP C].
2/6/2009 10:55:35 AM 2/6/2009 10:55:35 AM