Table of Contents
Advertisement
06. Brightness (Command2:h)
➜ To adjust screen brightness.
Transmission
[k] [h] [ ] [Set ID] [ ] [Data] [Cr]
Data
Min : 0 ~ Max : 64
* Refer to 'Real data mapping 1'.
Ack
[h] [ ] [Set ID] [ ] [OK] [Data] [x]
Data
Min : 0 ~ Max : 64
07. Color (Command2:i)
➜ To adjust the screen color.
Transmission
[k] [ i ] [ ] [Set ID] [ ] [Data] [Cr]
Data
Min : 0 ~ Max : 64
* Refer to 'Real data mapping 1'.
Ack
[ i ] [ ] [Set ID] [ ] [OK] [Data] [x]
Data
Min : 0 ~ Max : 64
08. Tint (Command2:j)
➜ To adjust the screen tint.
Transmission
[k] [ j ] [ ] [Set ID] [ ] [Data] [Cr]
Data
Red : 0 ~ Green : 64
* Refer to 'Real data mapping2'.
Ack
[ j ] [ ] [Set ID] [ ] [OK] [Data] [x]
Data
Red : 0 ~ Green : 64
09. Sharpness (Command2:k)
➜ To adjust the screen sharpness.
Transmission
[k] [k] [ ] [Set ID] [ ] [Data] [Cr]
Data
Min : 0 ~ Max : 64
* Refer to 'Real data mapping 1'.
Ack
[k] [ ] [Set ID] [ ] [OK] [Data] [x]
Data
Min : 0 ~ Max : 64
10. OSD Select (Command2:l)
➜ To select OSD On/Off.
Transmission
[k] [ l ] [ ] [Set ID] [ ] [Data] [Cr]
Data
0 : OSD Select Mode Off
1 : OSD Select Mode On
Ack
[ l ] [ ] [Set ID] [ ] [OK] [Data] [x]
Data
0 : OSD Select Mode Off
1 : OSD Select Mode On
11. Remote Control Lock/Key Lock
(Command2:m)
➜ To lock the front panel controls on the
projector and remote control.
Transmission
[k] [m] [ ] [Set ID] [ ] [Data] [Cr]
Data
0 : Lock Off
1 : Lock On
Ack
[m] [ ] [Set ID] [ ] [OK] [Data] [x]
Data
0 : Lock Off
1 : Lock On
* If you're not using the remote control, use this mode.
When main power is On/Off, external control lock is released.
12. Color Temperature (ACC) (Command2:u)
➜ Adjust the color temperature.
Transmission
[k] [u] [ ] [Set ID] [ ] [Data] [Cr]
Data
0 : Normal
1 : Cool
Ack
[u] [ ] [Set ID] [ ] [OK] [Data] [x]
Data
0 : Normal
1 : Cool
RS-232C
2:Warm
2:Warm
29
Advertisement
Table of Contents
