Advertisement
D. Comfort Setting
The Comfort Setting icon will be displayed when the Wall
Mounted Controller is in normal operation based on the Setpoint
Temperature for the room.
!
notE: Either the
or
dependent on the setting being used.
E. Synchronized icon
The Wall Mounted Remote Control will control one or multiple
Linear Proportional Convector Heaters within a 50' (15 m)
radius. In order for the wall setter to have this function the
Linear Proportional Convector and the Wall Setter need to be
Synchronized.
1.
On the Linear Proportional Convector press and hold the
button for 3 seconds, both the
to flash.
2.
Press the
- , + and then V, on the Linear Proportional
Convector.
3.
Within 10 seconds press any button once on the Wall Setter.
!
notE: There is a 3 second delay between pressing the last
button on the wall setter and the LPC's receipt of signal.
!
notE: To desynchronize a Linear Proportional Convector from
the synchronized Wall Setter, on the Linear Proportional Convector:
1.
Press and hold the
2.
Press the
V, + and then -.
Nothing will need to be done to the Wall Setter.
F. Lock icon
The Wall Mounted Remote Control has a Button Lock feature, to
prevent settings from accidentally being changed.
V for 3 seconds. Both the
1.
Press and hold the
Icons will begin to flash.
2.
To Enable:
Within 5 seconds press +, then -, then +, then -.
The
icon will now be visible.
To Disable: Within 5 seconds press -, then +, then -, then +.
The
icon will no longer be visible.
!
notE: The remote control can be locked in either the Comfort
or Economy Setting. Ensure that the desired icons are present
when locking is complete.
1367 Industrial Road Cambridge ON Canada N1R 7G8
1-888-346-7539 www.dimplex.com
In keeping with our policy of continuous product improvement, we reserve the right to make changes without notice.
© 2011 Dimplex North America Limited
icon will always be visible,
and
icons will begin
V for 3 seconds.
and
G. Low Battery icon
The Wall Mounted Remote Control is powered by a CR2032 (3V)
battery. When the battery is nearing the end of its life the Low
Battery Icon will appear on the LCD display.
To change the battery:
1.
Remove the Wall Mounted Remote Control from the
electrical box.
2.
Remove the back plastic cover from the remote control.
3.
Replace the battery.
!
bottom battery prongs.
4.
!
all settings while battery is removed and will revert
V
to those settings when power is restored.
Battery Prongs
Recycling notice
At the end of the electrical products useful life it should
not be disposed of with household waste. Please recycle
where facilities exist. Check with your Local Authority or
retailer for recycling advice in your country.
Warranty
LiMitED WaRRantY: All Dimplex Thermostats and controllers
are warranted against defects in workmanship and materials
for one year from date of sale. This warranty does not apply
to damage from accident, misuse, or alteration, nor where the
connected voltage is more that 5 % above the nameplate voltage,
nor to equipment improperly installed or wired or maintained in
violation of the instruction sheet. This limited warranty applies only
to purchases made in any province of Canada except for Yukon
Territory, Nunavut, or Northwest Territories or in any of the 50
States of the USA (and the District of Columbia) except for Hawaii
and Alaska. This limited warranty applies to the original purchaser
of the product only and is not transferable. No other written or oral
warranty applies. No employee, agent, dealer or other person
is authorized to give any warranties on behalf of Dimplex. The
customer shall be responsible for all costs incurred in the removal
or reinstallation and shipping of the product for repairs. Within the
limitations of this warranty, inoperative units shall be returned to
the nearest Dimplex authorized service center, and we shall repair
or replace, at our option, at no charge to you with return freight
paid by Dimplex. It is agreed that such repair or replacement is
the exclusive remedy available from Dimplex and that DIMPLEX IS
NOT RESPONSIBLE FOR DAMAGES OF ANY KIND, INCLUDING
INCIDENTAL AND CONSEQUENTIAL DAMAGE. Some States
do not allow the exclusion or limitation of consequential damages,
so the above exclusion or limitation may not apply to you. This
warranty gives you specific legal rights and you may also have
other rights which vary from state to state.
notE: Ensure that battery is installed under
Reassemble and remount remote control.
notE: Wall Mounted Remote Control will retain
Advertisement
