Volvo XC60 Owner's Manual page 163

Hide thumbs Also See for XC60:
Table of Contents

Advertisement

support is activated. Brake support prepares
the brake system to react quickly, and the
brakes are applied slightly. This may be expe-
rienced as a light tug.
If the brakes are applied quickly, full braking
effect will be provided, even if pressure on the
brake pedal is light.
Auto-brake
If a collision is imminent and the driver has not
applied the brakes, the auto-brake function is
activated without the driver pressing the brake
pedal. Limited brake force is applied to reduce
the vehicle's speed when the collision occurs.
WARNING
The auto-brake function connot prevent a
collision but instead is intended to reduce
speed at the moment of impact. For full
braking effect, driver must apply the brakes.
NOTE
The auto-brake function is always on and
cannot be turned off.
Operation
Some settings are controlled from the center
console via a menu system. For information on
how the menu system is used, see page 122.
04 Comfort and driving pleasure
On and off
To switch Collision Warning on or off, go into
the menu
Car settings
Collision warning
settings
and select On or Off. When the engine
is started, the setting that was selected when
it was switched off will be used.
Activating/deactivating warning signals
The collision warning system's audible and vis-
ual signals are activated automatically when
the engine is started if the collision warning
system is activated.
The audible warning signal can be activated/
deactivated by selecting the alternative
Off
Car settings
Collision warning
in
settings
Warning
sound.
Setting a warning distance
This setting determines the distance at which
the visual and audible warnings are triggered.
Long, Normal
Short
Car
Select
or
under
settings Collision warning settings
Warning distance
The warning distance determines the level of
sensitivity used by the system. The warning
distance
Long
provides an earlier warning.
Begin by using Long and if the system gives
too many warnings, try changing to
Normal.
Collision warning with Auto-brake*
WARNING
The setting
Short
should only be used
in situations where traffic is light and
moving at low speeds.
Collision Warning alerts the driver to the
risk of a collision but this function can-
not reduce the driver's reaction time.
For Collision Warning to be as effective
as possible, it is recommended that Dis-
tance Alert be set to 4 or 5, see
page 179.
On
or
NOTE
When adaptive cruise control is used,
the warning light and signal will be used
by cruise control, even if they have been
deactivated by the driver.
In situations where traffic is moving at
considerably different speeds, or if the
vehicle ahead brakes suddenly, warn-
ings may be considered to be late, even
if the setting
Long
has been selected.
Checking settings
The current Collision Warning settings can be
checked by going into the menu system at
settings
Collision warning
page 122 for more information on the menu
system.
*
Option/accessory, for more information, see Introduction.
04
Car
settings. See
}}
161

Advertisement

Table of Contents
loading

Table of Contents