Table of Contents
Advertisement
Entry to the Rear Seat (Suburban Second Seat)
The right side of the rear 60/40 split folding bench seat,
available in the Suburban, has
an
easy entry feature.
That makes it easy to get in and out of the third seat, if
you have one.
There is a foot operated
release lever for rear seat
passengers to use when
getting out of the third seat.
To operate the seat, move the lever at the side of
the
seat down.
Tilt the seatback toward the front of the vehicle by
pulling the top of the seatback forward.
When you do, the seat bottom will release. Just pull the
seat forward until it stops.
To
release the easy entry second seat, lift up
on
the
top of the release lever with your foot. Push the top
of the seatback forward and tilt it toward the front of
the vehicle.
To return the seat to its regular position, return the
seatback to its upright position, then push the whole seat
rearward until it latches.
After returning the seat to its regular position, try to
move the seat with your body, to make sure the seat is
locked into place.
1-13
Advertisement
Table of Contents
