Table of Contents
Advertisement
To remove the shade from the vehicle, first let the shade
go all the way into the holder. Then, push
the shade
holder toward the passenger side of the vehicle. Lift the
shade up on the driver's side, swing the shade rearward,
and take it out of the vehicle.
To put the shade in the vehicle, first make sure the shade
slot in the holder faces rearward with the round surface
facing down. Then, hold the shade at an angle and place
the shade holder tab into the slot in the passenger's side
trim panel. Move the other end of the shade forward and
hold it next to the driver's side trim panel slot.
Push the shade holder toward the passenger side of the
vehicle and place the tab in the driver's side trim panel
slot. Make sure the tab goes all the way in the slot.
Lightly pull on the shade holder to make sure
it
is secure.
Then, pull the shade to the desired position and secure the
shade posts in the appropriate retaining sockets.
2-49
Advertisement
Table of Contents
