Motion Area Setup - Planet Networking & Communication DVR-462 User Manual

Item
Alarm Duration(Seconds)
Motion Popup
Enable
Sensitivity

Motion Area Setup

Apply to All
5.3.1.1 Motion Area Setup
There are partitions in motion detection area (22x15 blocks). Under initializing status,
motion detection area is in the entire screen. Red colored area is undetected; yet the
detected area is transparent.
Alarm duration time (1~60 seconds).
Check the box to Enable/ Disable popup screen function for all channels.
When motion is detected in LIVE mode, the detected channel image will
popup in full screen display.
Check the box to Enable/ Disable motion detection for each channel.
Drag the bar or press ◀ ▶ to set up Sensitivity from value 0 to 10 for each
channel. The lower value you set lower the sensitivity it will be
Enter to setup motion detection area
Set all the channels to the same setting.
21
Description