Planet Networking & Communication DVR-872 Quick Installation Manual

 Contents
DVR-872 / DVR-1672
Screw kit x 1
Quick Installation Guide
 Hard Disk Installation
Caution: Before hardware HDD installation, please make sure there is no pre-configured partition in this HDD. If yes, please delete all the partition before install.
STEP 1: Remove the upper case
STEP 2: Lock the HDD holder
symmetrically onto both
sides of the HDD
2-2
2-3
Lock the screw

Quick Guide

Battery x 2
I/O cable x 1 SATA cable x 2 (DVR-872)
HDD rack x 4 (DVR-872)
STEP 3: Insert the SATA and power
cable onto the SATA HDD
STEP 4: Place the HDD
on the HDD plate
STEP 5: Connect the Power and SATA cable into the sockets on the main board.
Make sure that the HDD0 cable has been properly inserted
into HDD0 socket.
Power adapter & Power Cord
HDD rack x 6 (DVR-1672)
HDD0
HDD1
HDD2 HDD0
DVR-872
DVR-1672
Remote control
SATA cable x 3 (DVR-1672)
CD Disk
STEP 6: The installation has
completed
DVR-1672
HDD1
HDD2 HDD0
or
DVD BURNER
DVR-872
HDD2
HDD0
or
DVD BURNER