Table of Contents
Advertisement
CHAPTER 5
CLEANING /
DEINSTALLATION
DANGER
DANGER
5.0
Cleaning
Safety instructions listed in Chapter 1.2 must be observed!
- Before cleaning always ensure that the fan unit is isolated from the power supply
and secured against restarting!
- Clean facade, protective guard and visible housing parts (the external housing of
the fan) with a damp cloth!
- Do not use any aggressive, paint solvent cleaning agents!
- High pressure cleaner or spray water is not permitted!
5.1
Cover Dismantling
1. Isolate the fan unit from the power supply and secured against restarting.
2. Pull the side pieces (cover plates) of the upper part of the housing outwards (see
fig 1/fig 2) to unlatch it and upwards until the cover plate is opened.
Fig 1
Fig 2
Advertisement
Table of Contents
