Advertisement
ENABLING STARTER VALET MODE
1. Make sure you did set the alarm valet mode, as you require.
2. Set the valet switch ON
3. The remote starter is now disabled.
DISABLING STARTER VALET MODE
1. Make sure you did set the alarm valet mode, as you require
2. Set the valet switch OFF
4. The remote starter is now in normal operation
LED FLASH RATE
LED
RATE
OFF
-
ON
-
FLASHING
SLOWLY
FLASHING
QUICKLY
1 FLASH
INTERMIT.
3 FLASHS
INTERMIT.
4 FLASHS
INTERMIT.
SIREN «CHIRPS»
Number of
Chirps
1
2
3
Door and Hood open when Arming (Lock)
After Disarm (Unlock) indicates Alarm was set
4
ON = No Starter
OFF = Remote Starter works
The alarm system is disarmed and the Alarm Valet Mode is disabled. In
passive arming mode, the key switch should be in the ON position to prevent
arming if the user stays inside the vehicle.
The system is in Valet Mode. All alarm functions and the starter kill are
disabled. The remote starter function is still active, as well as remote door
locking/unlocking and trunk.
The alarm system is armed.
In Passive Arming Mode, the system is in it's 35 seconds exit delay before
arming
ALARM MEMORY STATUS: There has been a power-up or a panic alarm.
Turning the key switch in the ignition position clears the alarm memory status
indication.
ALARM MEMORY STATUS: There has been a hood intrusion alarm. (With
Chirp delete ON)
ALARM MEMORY STATUS: There has been a door or hood intrusion
alarm or shock with Chirps ON or door or shock with Chirps OFF.
Chirps ON (Normal)
LOCK & ARM
Normal
UNLOCK & DISARM
Normal
OFF
6
DESCRIPTION
Chirps OFF (Chirp Delete)
After Arming (LOCK) indicates
Door was left "open"
After Arming (Lock) indicates
Hood was Left "open"
After Disarm (Unlock) indicates
Door, Hood or Shock were
violated.
Page
Advertisement
