Setting Up And Installation; Where To Place The Freezer - Lec CU 357 Operating Instructions Manual

GB/IE

Setting up and installation

Where to place the freezer

For safety reasons the freezer must not be installed outdoors; it must be placed in a dry
room. Never place the appliance close to sources of heat such as cookers or radiators,
and avoid placing it in direct sunlight. The surface on which the appliance is placed must
be plane. Do not use a frame or similar. The small wheels mounted at the rear of the
freezer make it easy to place it in the required position.
The freezer can stand freely on the floor or be built into a kitchen element or a refrigera-
tor element.
It is important that the appliance stands completely level and that there is good air
circulation over, under and around it. The freezer can be adjusted by turning the four
adjusting screws on the plinth. After adjustment, the feet and the two rear wheels must
be in contact with the surface on which the appliance stands.
9