Installation - Lec CF100LW User Manual

Installation

Installation Installation Installation
Install and level the appliance on a floor able to take its weight and in a place suitable for its
•
size and use.
Insert the plug into a socket which is appropriate. This appliance has a plug already fitted – if
•
the plug is not suitable for your socket we suggest that you call an authorized electrician for
assistance. If the plug is damaged in any way – do not attempt to use it. It must be replaced
with a new plug.
Do not install the appliance in direct sunlight and close to heat sources. Do not allow the
•
appliance to be exposed to rain.
Choose a well ventilated area. There should be at least 10 cm of open space along the sides,
•
top, and back of the freezer.
Before switching on place the appliance in an upright position and wait at least three hours
•
without moving the appliance. This will give the refrigerant circuit time to settle and operate
efficiently.
Install the appliance in a dry and well-ventilated place. The appliance is for use in places
•
within the temperature ranges defined according to the climatic class given on the Data
Label located on the back of the product. The appliance may not operate consistently if it is
sited for extended periods of time below the cold end of the climate class temperature range
for which the appliance is designed.
If the appliance is installed next to another refrigerator or freezer, observe the minimum
•
distance of 10cm to avoid condensation.
The The manufacturer manufacturer is is is is not manufacturer
The The manufacturer
•
in in in in this this this this guide. guide. guide. guide.
This appliance is intended for use in households but is not intended to be used in applications such
as;
Staff kitchen areas in shops, offices and other working environments;
•
Farm houses and by clients in hotels, motels and other residential type environments;
•
Bed and breakfast type environments;
•
Catering and similar non-retail applications;
•
Operating voltage for your fridge is 220-240 V at 50Hz
Conformity Conformity Information Information
Conformity Conformity Information Information
• The appliance is designed in compliance with the Directive 2006/95/EC, IEC60335-2-24,
IEC60335-1. Directive 2004/108/EC, EN55014-1:2006/+A1:2009,
EN55014-2:1997/+A1:2001/+A2:2008, EN61000-3-2:2006/+A1:2009/+A2:2009 and
EN61000-3-3:2008.
not not responsible responsible for for
not responsible responsible for for failure
3
failure failure to to to to complete failure complete complete
complete installation
installation installation as as described described
installation as as described described