Panasonic KX-TGA401C Installation Manual page 14

TGA401C(e).fm Page 14 Monday, January 18, 2010 5:22 PM
3
{SAVE} i {OFF}
Note:
L When storing your Voice Mail access number and your mailbox
password, press {PAUSE} to add pauses between the access number
and the password as necessary. Contact your service provider/
telephone company for the required pause time.
L To erase the Voice Mail access number: Press and hold {CLEAR}
until all digits are erased in step 2. i {SAVE} i {OFF}
Voice Mail service: Voice Mail (VM) tone detection
Your service provider/telephone company sends special signals
(sometimes called "Voice Mail tones" or "stutter tones") to the unit to let
you know you have new Voice Mail messages after you press {C}.
Soon after you hang up a call or after the phone stops ringing, your unit
checks the phone line to see if new Voice Mail messages have been
recorded.
If you are not sure which setting is required, contact your service
provider/telephone company.
Turn this feature off when:
– You do not subscribe to Voice Mail service.
– Your service provider/telephone company does not send Voice Mail
tones.
– Your phone is connected to a PBX.
1
{MENU} i {#}{3}{3}{2}
2
{V}/{^}: Select the desired setting. i {SAVE} i {OFF}
Voice Mail service: Listening to Voice Mail messages
The unit lets you know that you have new Voice Mail messages:
– "New Voice Mail" is displayed if message indication service is
available.
– The message indicator flashes slowly if the message alert feature is
turned on (page 15).
1
{VM}
or
{MENU} i {#}{3}{3}{0}
14