Panasonic KX-TGA401C Installation Manual page 13

TGA401C(e).fm Page 13 Monday, January 18, 2010 5:22 PM
L When you select "Off", go to step 5.
3
Set the desired time. i {AM/PM}: Select "AM" or "PM". i {OK}
4
{V}/{^}: Select the desired alarm tone. i {SELECT}
5
{SELECT} i {OFF}
L When the alarm is set, E is displayed.
Note:
L To stop the alarm, press any dial key or place the handset on the base
unit or charger.
Night mode
Night mode allows you to select a period of time during which the
handset will not ring for outside calls.
Important:
L Set the date and time beforehand (page 7).
L If you have set the alarm, the alarm sounds even if the night mode is
turned on.
1
{MENU} i {#}{2}{3}{8}
2
{V}/{^}: Select "On" or "Off". i {SAVE}
L If you select "Off", press {OFF} to exit.
3
Enter the desired hour and minute you wish to start this feature.
4
{AM/PM}: Select "AM" or "PM". i {OK}
5
Enter the desired hour and minute you wish to end this feature.
6
{AM/PM}: Select "AM" or "PM". i {SAVE} i {OFF}
L When the night mode is set, 3 is displayed.
N Changing the start and end time
{MENU} i {#}{2}{3}{7} i Continue from step 3.
Voice Mail service: Storing the Voice Mail (VM) access number
Once you have stored your service provider/telephone company's Voice
Mail access number, you can dial it automatically to listen to your Voice
Mail messages. You need to store the Voice Mail access number to
activate the message alert feature (page 15) for Voice Mail service.
1
{MENU} i {#}{3}{3}{1}
2
Enter your access number (24 digits max.).
13