Advertisement
Figure 1b
To wall
The leg locating brackets then require to be secured to the worktop surface using the
appropriate fixings. The fixing centres are indicated in Figure 1b. The brackets should then
be rotated to ensure that the location holes correspond with the side fixing hole in each leg.
Locate the brackets up inside the legs and insert one fixing in each to secure the assembly.
A further option is to position the grill upon an optional shelf bracket (see Figure 2). The
installer should ensure that the wall upon which the shelf is to be mounted can support the
weight. This requires to be plugged to accommodate No.8 wood screws or equivalent of at
least 50mm in length.
To fix, hold the shelf horizontally in the desired position and mark the fixing holes through the
flanges prior to drilling. Insert the plugs and secure the bracket firmly in position. The grill
should then be placed upon the bracket and located using the fixings provided.
Either option requires an installation clearance of 50mm at the sides and rear to be
observed.
Leg bracket fixing centres
Grill Fixings
Advertisement
