Advertisement
Quick Links
Important Installation Information
The installer must ensure that installation of the unit(s) is in conformity with regulations in
force at the time. For the UK, particular attention requires to be paid to:-
BS7671 IEE Wiring Regulations
Electricity at Work Regulations
Health and Safety at Work Act
Fire Precautions Act
The unit has been CE-marked on the basis of compliance with the Low Voltage and EMC
Directives for the voltage stated on the data plate.
WARNING: THIS APPLIANCE MUST BE EARTHED!
Preventive Maintenance Contract
In order to obtain maximum performance from the equipment, we would recommend that a
maintenance contract be arranged with Serviceline. Visits may then be made at agreed
intervals to carry out adjustments and repairs. A quotation for this service will be provided
upon request. Contact Serviceline as detailed below:-
Tel: 01438 363 000
WEEE Directive Registration No. WEE/DC0059TT/PRO
At end of unit life, dispose of appliance and any replacement parts in a safe
manner, via a licenced waste handler.
Units are designed to be dismantled easily and recycling of all material is
encouraged whenever practicable.
Falcon Foodservice Equipment
Wallace View, Hillfoots Road, Stirling. FK9 5PY
Tel: 01786 455 200
e-mail: info@falconfoodservice.com
LD22 GRILL
Fax: 01438 369 900
Fax: 01786 469 454
T100322 Ref. 3
Advertisement
Related Manuals for Pro Lite LD22
Summary of Contents for Pro Lite LD22
- Page 1 LD22 GRILL Important Installation Information The installer must ensure that installation of the unit(s) is in conformity with regulations in force at the time. For the UK, particular attention requires to be paid to:- BS7671 IEE Wiring Regulations Electricity at Work Regulations...
- Page 2 Technical Installation Information Table Note * 13A Fuse Rating: The unit must be protected by a 13 amp fuse if a 13 amp plug is used. If another type of plug is used, a 15A fuse requires to be used in the plug, adaptor or distribution board.
- Page 3 Leg bracket fixing centres Figure 1b Grill Fixings To wall The leg locating brackets then require to be secured to the worktop surface using the appropriate fixings. The fixing centres are indicated in Figure 1b. The brackets should then be rotated to ensure that the location holes correspond with the side fixing hole in each leg. Locate the brackets up inside the legs and insert one fixing in each to secure the assembly.
-
Page 4: Electrical Supply And Connection
SECTION 2 - ELECTRICAL SUPPLY AND CONNECTION Electrical ratings are as stated on the unit data plate. The listing in Table 1 is based on standard UK specification at 230V. Wiring must be executed in accordance with the regulations listed in this booklet. WARNING: Each individual appliance must be earthed! After completion of installation, the method of operation should be demonstrated to the kitchen staff. - Page 5 Never attempt to steam clean a unit or hose it down with a jet of water. LD22 GRILL Supplied with toast grid and removable drip tray as standard. A cast aluminium brander is available as an optional extra.
-
Page 6: Functional Components
LD22 GRILL SERVICE ACCESS Removal of Control Panel Undo fixing on RH underside of control panel. Lower panel to clear top edge catch. FUNCTIONAL COMPONENTS Temperature Controls Remove control panel. Remove electrical connections, noting the positions. Remove control knob. Undo fixings which secure control to panel and remove. - Page 7 Element Remove control panel. Undo element electrical connections, noting positions. Undo element panel fixings and remove element. Replace in reverse order. PROLITE GRILL SHORT SPARES 737630010 Element 737630011 Energy Regulator 735110050 Control Knob 730962010 Mains Neon 735011110 Supply Cable...
- Page 8 LD22 Wiring Diagram...