Download Print this page
Phoenix Gold XS 2200 User Manual

Phoenix Gold XS 2200 User Manual

Advertisement

Phoenix Gold International, Inc. (or "Phoenix Gold") warrants its products against defects in materials and
workmanship for a limited period of time.
For a period of one (1) year from date of original purchase, we will repair or replace the electronic product, at our option,
without charge for parts and labor. The limited warranty period is EXTENDED to three (3) years from date of original
purchase if the product was originally installed by an authorized Phoenix Gold electronics dealer and accompanied by a valid
sales receipt showing a charge for installation. Customer must pay all parts and labor charges after the limited warranty
period expires. The limited warranty period for factory refurbished products expires after ninety (90) days from date of
original purchase. This limited warranty applies only to purchases from authorized Phoenix Gold Electronics/Speaker
retailers.
This limited warranty is extended only to the original purchaser and is valid only to consumers in the United States.
Consumers are required to provide a copy of the original sales invoice from an authorized Phoenix Gold dealer when making
a claim against this limited warranty. This limited warranty only covers failures due to defects in materials or workmanship
that occur during normal use. It does not cover failures resulting from accident, misuse, abuse, neglect, mishandling,
misapplication, alteration, faulty installation, modification, service by anyone other than Phoenix Gold, or damage that is
attributable to Acts of God. It does not cover costs of transportation to Phoenix Gold or damage in transit.
This warranty will become void if the serial number identification has been wholly or partially removed, altered or erased.
Repair or replacement under the terms of this warranty does not extend the terms of this warranty.
Should a product prove to be defective in workmanship or material, the consumer's sole remedies will be repair or
replacement as provided under the terms of this warranty. Under no circumstances shall Phoenix Gold be liable for loss or
damage, direct, consequential or incidental, arising out of the use of or inability to use the product. There are no express
warranties other than described above.
8100.0171A
• Defeatable 18dB per Octave Crossover:
Fixed at 125 Hz High Pass or Fixed at 90 Hz Low Pass
• Adjustable Twin T™ Bass Enhancement with 18dB of Boost Centered @ 45Hz
• External Output to send Full Range Signals to an additional amplifier without the use
of Y connections
• 24kt Gold Plated Signal Input and Output Jacks
• 24kt Gold Plated Power and Speaker Terminals
• Power-on LED Indicator
• Fully Differential Hi-Level Inputs for Easy Integration with most Factory Headunits
• Fully Differential Line Level Inputs Eliminates Common Noise Problems
• Glass Filled ABS Isolation Mounting Feet
• PWM Mosfet Power Supply
• T ri-Linear™ Capability Allows Simultaneous Stereo and Bridged Mono Operation
• Stable into 2 ohm Bridged or 1 ohm Stereo Speaker Loads
• Advanced Muting Circuitry Eliminates Turn-on and Turn-off Noises
• Advanced Thermal and Overload Protection
• 2 layer, 2 ounce, Copper G10 Glass-Epoxy Printed Circuit Board
• Audiophile Grade Metal Film Capacitors and 1% Metal Film Resistors

Advertisement

loading

Summary of Contents for Phoenix Gold XS 2200

  • Page 1 This limited warranty is extended only to the original purchaser and is valid only to consumers in the United States. Consumers are required to provide a copy of the original sales invoice from an authorized Phoenix Gold dealer when making a claim against this limited warranty.
  • Page 2 The level should flucuate with the peaks in music. I thank you for purchasing this Phoenix Gold product. By doing so, you have demonstrated a desire to own the Faulty input signal cables Use an AC volt meter to check for voltage at the signal finest audio components available for the car and home.
  • Page 3 Features Cover Introduction Specifications Operational Details System Configurations Powerflow™ Systems INPUT SENSITIVITY AND BASS ADJUSTMENT Installation-Mounting Adjustments- Input Sensitivity and Bass Adjustment Inputs 1. Install all system fuses. 9. Use the amplifier’s sensitivity Troubleshooting control to reach maximum Limited Warranty undistorted speaker output.
  • Page 4 Line-Level: Connect high quality RCA style signal cables to the inputs jacks. Use both left and right input jacks for stereo, bridged or Tri-Mode operation. For maximum noise rejection, we recommend Phoenix Gold QLX or TRX twisted pair signal cables. HI LEVEL INPUT...
  • Page 5 The Zytel ST801 mounting feet allow the amplifier amplifier using PG# PRO40 spade terminals. to be mounted on almost any surface. If damaged, they can be ordered through an Authorized Phoenix Gold Mobile Electronics Retailer. * PRO8 (8 gauge) or PRO40 (4 gauge) Minimum 1”...
  • Page 6 ™...