Removing The Fan Tray; Removing The Power Supplies - F5 ARX 6000 Hardware Installation Manual

Removing the Fan Tray

Removing the Power Supplies

®
ARX 6000 Hardware Installation Guide
The fan tray is accessible from the front of the chassis. It is located at the top
of the switch.
1. Loosen the captive screws on either side of the fan tray, grasp the
handle, and slowly pull the fan tray toward you (see Figure 6.2).
Figure 6.2 Removing Fan Tray
captive screws
2. Carefully slide the fan tray out of the top of the chassis and set
aside.
The chassis contains two power supplies that are accessible from the front
panel. The top power supply is called power supply "A" in the CLI's
chassis chassinfo
command. The bottom power supply is power supply "B."
Removing the Fan Tray
show
6 - 7