Switcher Section - NewTek TriCaster 8000 CS User Manual

As you'd expect given the different control labels, in certain cases LC-11's buttons and controls
will behave differently depending on which model is connected.
For example – the (SD) TriCaster Broadcast system has just one Overlay (DSK) channel, while HD
models have two; TriCaster 300 has one DDR, while 450 and 850 models have two, and so on.
Figure 92 illustrates LC-11 in various configurations.
Note: The labels for some buttons list secondary functions. For example, the Net 1 button in the
LIVE and PREVIEW rows in the third drawing in Figure 92 shows V6 (Virtual Input 6) as a
secondary option. Holding down ALT along with a button activates its alternate assignment.
Your LC-11 may have arrived with multiple button cap sets. To change button caps to match any
of the illustrations above, pry the installed cap off gently using a thin, flat bladed screwdriver (or
similar implement), then firmly press the new cap into place.
8.2

SWITCHER SECTION

Figure 93
The largest of the three main sections of the LC-11 control surface corresponds to your live
production system's Switcher, as you can see in Figure 93.
Page | 105