LG Flatron L4200A User Manual page 9

• Input Select Button
If you press the button once,
the following Input Signal
Window will appear. Select
the signal type you want
using the button.
DVI DIGITAL
DSUB ANALOG
VIDEO1(CVBS)
VIDEO2(S-Video)
SCART 1
SCART 2
[Case 1]
DVI DIGITAL
DSUB ANALOG
VIDEO1(CVBS)
VIDEO2(S-Video)
COMPONENT 1
COMPONENT 2
[Case 2]
1.
PIP (Picture in Picture) Button
The sub-screen moves to the next mode whenever you press this button.
: SMALL -> LARGE -> OFF
2.
POP (Picture out Picture) Button
The sub-screen moves to the next mode whenever you press this button.
: POP ON -> PBP(FULL) -> PBP(4:3) -> OFF
POP ON
Case 1 / Case 2
Note
Different descriptions are applicable depending on the type of AV option board selected (an optional
product).
• AV Button
BRT.W
This button will be enabled only
when you selected the AV signal.
The signal type will be changed
with the following order. Set the
signal type you want.
[Case 1]
CVBS
[Case 2]
CVBS
COMPONENT2
*
PBP (FULL)
A6
S-Video SCART1 SCART 2
S-Video COMPONENT1
PIP
PBP (4:3)