When connecting with a SCART cable.
C
Monitor
Select an input signal.
Press the Input Select button on the remote controller to select the input signal. Or, press
the SOURCE button at the front side of the monitor.
A
When connecting with an RCA cable.
• Select VIDEO 1 (CVBS)
When connecting with an S-Video cable.
B
• Select VIDEO 2 (S-Video)
When connecting with a SCART cable.
C
• Select SCART 1 / SCART 2
Note
Since the SCART1 terminal supports the component (RGB), connect to the SCART1
terminal if the component (RGB) function is supported by the DVD player.
Video
AUDIO
G
VCR/DVD
D
DVI DIGITAL
DSUB ANALOG
VIDEO1(CVBS)
VIDEO2(S-Video)
SCART 1
SCART 2
[Case 1]
A14
L
R