HIKVISION DS-2CD2412F-I Quick Operating Manual page 11

Network Cube Camera· Quick Operation Guide

Press RESET about 10s when the camera is power on or
rebooting to restore the default settings, including the user
name, password, IP address, and port No., etc.

A wireless router with the WPS function is required to enable
the WPS function of the camera. Refer the steps below.
Steps:
1. Press the WPS button on the router.
2. Press the WPS button (about 2s) on the camera within 120s
you enable the WPS of the router to join in the wireless
network.

The WPS button works as a reset button only when you
press it when the camera is powering on.

Press the WPS button on the camera, and then press the
WPS button on the router will work as well, and the expire
time of WPS connection on the camera is 120s.

The link indicator blinks if the wireless connection is
succeeded.
10