Specifications - Panasonic CQ-VW120W Operating Instructions Manual

Specifications

General
¡Power supply
: 12 V DC (11 V – 16 V), test
¡Current consumption
: Less than 10 A (during disc
¡Power Output : 20 W x 4 ch
¡Maximum power output : 50 W x 4 ch
¡Compatible speaker
: 4 Ω – 8 Ω
impedance
¡Video input signal : Composite video signal, 1.0
¡Audio input sensitivity
: 2 Vrms
¡Video output signal
: Composite video signal, 1.0
¡Pre-Amp output voltage
: 2 Vrms
¡Pre-Amp output impedance : Less than 600 Ω
¡Dimensions (W x H x D)
: 178 x 100 x 160 mm
¡Weight
: 2.3 kg
FM stereo radio
¡Frequency range : 87.5 MHz – 108 MHz
¡Usable sensitivity : 7 dB/µV
¡Stereo separation : 30 dB (1 kHz)
¡S/N ratio : 62 dB
AM radio
¡Frequency range
: 531 kHz – 1 602 kHz
¡Usable sensitivity
: 28 dB/µV
¡Image rejection ratio
: 50 dB
Note:
¡Specifications and the design are subject to modification without notice due to improvements in technology.
¡Some figures and illustrations on this manual may be different from your product.
Playable region number
This operating instruction manual is for 3 models CQ-
VW120W2/CQ-VW120W3 and CQ-VW120W5.
The following table shows the playable region number
for each model.
Applicable iPod/iPhone
Made for.
¡ iPod (5th generation)
¡ iPod nano (1st generation)
¡ iPod nano (2nd generation)
¡ iPod nano (3rd generation)
¡ iPod nano (4th generation)
¡ iPod touch (1st generation)
¡ iPod touch (2nd generation)
¡ iPod classic
Works with.
¡ iPhone
¡ iPhone 3G
* The applicable models have been confirmed as the
end of January 2009. We do not guarantee the
operation with our future products or upgraded
software.
voltage 14.4 V, negative
ground
playback)
(1 kHz, 1 %, 4 Ω)
Vp-p (75 Ω)
Vp-p (75 Ω)
Audio section
¡Output voltage/
: 2 Vrms/600 Ω
Impedance
¡Frequency
characteristics : 20 Hz – 20 kHz (±1 dB)
¡Dynamic range : 96 dB (during CD playback)
¡S/N ratio : 95 dB (during CD playback)
Monitor
¡Liquid crystal panel : 6.1-inch wide (15.5 cm)
¡Screen dimensions
(W x H x D) : 136 x 72 x 154 mm
¡Number of pixels
: 336 960 pixels (234 vertical x
¡Valid pixel ratio
: Over 99.99%
¡Display method
: Transparent color filter format
¡Drive method
: TFT (Thin Film Transistor)
USB connector
¡USB standard compatibility : 1.1/2.0 full speed
¡File system : FAT12/16/32
¡Maximum supply current : 500 mA
¡Playable audio format : MP3/WMA
¡Recommended capacity : Less than 4 GB (1 partition)
Front AV input (AV IN)
¡Input impedance : 47 kΩ
¡Allowable external input
: 2.0 V
¡Connector
: 3.5 mm mini-plug (Equipped
¡Video input signal
: Composite video signal, 1.0
¡Audio input sensitivity
: 2 Vrms
Model
CQ-VW120W2
CQ-VW120W3
CQ-VW120W5
"Made for iPod" means that an electronic accessory has
been designed to connect specifically to iPod and has
been certified by the developer to meet Apple
performance standards.
"Works with iPhone" means that an electronic accessory
has been designed to connect specifically to iPhone and
has been certified by the developer to meet Apple
performance standards.
¡ iPod is a trademark of Apple Inc., registered in the
U.S. and other countries.
¡ iPhone is a trademark of Apple Inc.
Apple is not responsible for the operation of this device
or its compliance with safety and regulatory standards.
480 horizontal x 3)
active matrix format
with video input terminal)
Vp-p (75 Ω)
Playable region number
2 (ALL)
3 (ALL)
5 (ALL)
CQ-VW120W
50
51