Usb - Audio Device Control - Panasonic CQ-VW120W Operating Instructions Manual

USB - Audio Device Control

Preparation:
¡Connect a USB audio device to USB connector of this unit.
Source Selection
25
q Touch "Source Button".
d
Press [SRC/PWR]/[SRC] to change to the
desired mode.
Caution
¡ Position the USB device and cable so that they do
not interfere with your driving.
¡ Do not connect any USB device other than a USB
memory, a USB audio player or an iPod/iPhone.
Do not connect multiple USB devices to the USB
connector. Supplying power to multiple USB
devices from the connector could cause overheat-
ing and smoking.
26
CQ-VW120W
[SRC/PWR]
w Touch
(iPod/USB) on the
Source Selection
Screen.
USB connector
Open the cover to make the USB connector accessible
and make a connection.
Note:
¡ This unit plays back MP3/WMA files stored on a USB
¡ Back up any important data beforehand. We cannot
¡ Refer to the section on "Compatible USB devices".
¡ Refer to the section on "Notes on MP3/DivX".
¡ A file with a play time exceeding 1 000 minutes will
¡ When connecting (disconnecting) a USB memory,
¡ When connecting a USB memory, make sure the con-
¡ Do not leave the USB device for long periods of time
¡ The USB devices that do not comply with the USB
¡ Even mass storage class USB devices may not nor-
¡ The USB devices that contain other than MP3/WMA
Source Button
Playing time
DIMMER MAP
VOL PUSH MUTE
AV IN
CQ-VW120W
Operation Buttons
memory.
accept responsibility for any lost data.
(a page 6)
(a page 22)
not play correctly to the end of the track.
turn down the volume of the unit.
nector is pushed all the way into the socket.
in places inside the car where the temperature rises
too high.
standard may not normally play with this unit.
mally play with this unit.
files may not normally play with this unit.
Title/text scroll
Folder selection