Charging Battery; Charging Battery (Ac Charger) - Sharp SoftBank 932SH User Manual

Charging Battery

Charging Battery (AC Charger)

1
Battery must be inserted in handset to
charge it.
. Use specified AC Charger ZTDAA1 (sold
separately) only. In this guide, ZTDAA1 is
referred to as "AC Charger."
. Handset and AC Charger may warm during
charging.
Small Light
Charger
Connector
Arrows
External Device
Port
Port Cover
Release Tabs
Important AC Charger Usage Note
. Fold back blades after charging. Do not
pull, bend or twist the cord.
Advanced
0
(Disabling USB Charge (P.1-28)
4
1-
1
Open Port Cover as shown
2
Connect AC Charger
. With arrows up, insert connector until
AC 100V Outlet
it clicks.
3
Extend blades and plug AC
Charger into AC outlet
Blades
AC Charger
. Small Light illuminates red while
charging.
. Small Light goes out when battery is
full.
4
Unplug AC Charger
. Pull AC Charger straight out.
5
Disconnect handset
. Squeeze release tabs to remove
connector.
6
Fold back blades and
replace Port Cover
When Small Light Flashes
. Battery is unchargeable; may be defective
or simply at the end of its life; replace it.
USB Charge
. Connect handset (with power on) to PC
via USB Cable to charge battery.
Charging Battery Overseas
. SoftBank is not liable for problems
resulting from charging battery abroad.