Pc Setup - LG DU-30LZ30 Owner's Manual

PC Setup

PC Setup
- This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. The TV sends config-
uration information (EDID) to the PC using the Video Electronics Standard Association (VESA) Display Data Channel (DDC)
protocol.
- The TV perceives 640x480, 60Hz as DTV 480p based on the PC graphic card. card, change the screen scanning rate for the
graphic card accordingly.
How to connect
1. To get the best picture quality, adjust the PC
graphics card to 1024x768, 60Hz.
2. Use the TV's RGB INPUT or DVI (Digital Visual
Interface) INPUT port for video connections,
depending on your PC connector.
• If the graphic card on the PC does not output
analog and digital RGB simultaneously, connect
only one of either RGB INPUT or DVI INPUT to
display the PC on the TV.
• If the graphic card on the PC does output analog
and digital RGB simultaneously, set the TV to
either RGB or DVI; (the other mode is set to Plug
and Play automatically by the TV.)
3. Then, make the corresponding audio connections.
If using a sound card, adjust the PC sound as
required.
How to use
1. Turn on the PC and the TV.
2. Turn on the display by pressing the POWER button on the TV's remote control.
3. Select RGB-PC or DVI-PC input source in main input option of SETUP menu. (Refer to P.20)
4. Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or bright-
ness in PC mode. If noise is present, change the PC mode to another resolution, change the refresh rate to another
rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphic
card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card.
NOTES: • Depending on the graphics card, DOS mode may not work if you use a DVI-I cable.
• Avoid keeping a fixed image on the TV's screen for a long period of time. The fixed image may become per-
manently imprinted on the screen. Use the Orbiter screen saver when possible.
• The synchronization input form for Horizontal and Vertical frequencies is separate.
Monitor Display Specifications (RGB-PC / DVI-PC Mode)
Horizontal
Resolution
Frequency(KHz)
31.468
640x350
31.469
720x400
37.927
31.469
37.861
640x480
37.500
43.269
PC/DVI
AUDIO INPUT
Vertical
Resolution
Frequency(Hz)
70.09
70.08
800x600
85.03
59.94
72.80
75.00
1024x768
85.00
MONITOR
COMPONENT 2
OUTPUT
DVD
/DTV
INPUT
A/V
COMPONENT 1
INPUT1
R L
RGB INPUT
(PC/DTV INPUT)
AUDIO INPUT VIDEO INPUT
Horizontal
Frequency(KHz) Frequency(Hz)
35.156
37.879
48.077
46.875
53.674
48.363
56.476
60.023
Installation
DVI INPUT
(PC/DTV INPUT)
S-VIDEO
Antenna1
(MONO)
AUDIO VIDEO
R L
Vertical
56.25
60.31
72.18
75.00
85.06
60.00
70.06
75.02
Antenna 2
15